The current method with max_pixel_count and max_pixel_count_step_up,
where only one should be used at a time and this first signaling an
inclusive upper bound and other other an exclusive lower bound, makes
for a lot of confusion.
I've updated this to have a desired target and a maximum instead. The
source should select a resolution as close to the target as possible,
but no higher than the maximum.
I intend to also add similar frame rate settings in an upcoming cl.
BUG=webrtc:4172,webrtc:6850
Review-Url: https://codereview.webrtc.org/2672793002
Cr-Commit-Position: refs/heads/master@{#16533}
We can then drop the CongestionController and RemoteBitrateEstimator
completely from the receive streams.
BUG=webrtc:6847
Review-Url: https://codereview.webrtc.org/2669463006
Cr-Commit-Position: refs/heads/master@{#16459}
Delete the calls from RtpStreamReceiver (for video) and
AudioReceiveStream.
BUG=webrtc:6847
Review-Url: https://codereview.webrtc.org/2659563002
Cr-Commit-Position: refs/heads/master@{#16393}
This CL introduces a way for the VideoReceiveStreams to check whether
they are protected by any FlexfecReceiveStreams. This is done in the
VideoReceiveStream::Start() method, which then propagates this information
down to the jitter buffer adaptation logic.
BUG=webrtc:5654
Review-Url: https://codereview.webrtc.org/2649973005
Cr-Commit-Position: refs/heads/master@{#16328}
This avoids issues where the bitrate produced by the codec is far lower than the target bitrate in the beginning, which causes the delay-based BWE to be initialized accordingly.
BUG=webrtc:5079
Review-Url: https://codereview.webrtc.org/2653883002
Cr-Commit-Position: refs/heads/master@{#16327}
Reason for revert:
Downstream project relied on changed struct.
Transition made possible by https://codereview.webrtc.org/2655243006/.
Original issue's description:
> Revert of Make RTX pt/apt reconfigurable by calling WebRtcVideoChannel2::SetRecvParameters. (patchset #7 id:160001 of https://codereview.webrtc.org/2646073004/ )
>
> Reason for revert:
> Breaks internal downstream project.
>
> Original issue's description:
> > Make RTX pt/apt reconfigurable by calling WebRtcVideoChannel2::SetRecvParameters.
> >
> > Prior to this CL, received RTX (associated) payload types were only configured
> > when WebRtcVideoChannel2::AddRecvStream was called. In the same method, the RTX
> > SSRC was set up.
> >
> > After this CL, the RTX (associated) payload types are set in
> > WebRtcVideoChannel2::SetRecvParameters, which is the appropriate place to set
> > them. The RTX SSRC is still set in WebRtcVideoChannel2::AddRecvStream, since
> > that is the code path that sets other SSRCs.
> >
> > As part of this fix, the VideoReceiveStream::Config::Rtp struct is changed.
> > We remove the possibility for each video payload type to have an associated
> > specific RTX SSRC. Although the config previously allowed for this, all payload
> > types always had the same RTX SSRC set, and the underlying RtpPayloadRegistry
> > did not support multiple SSRCs. This change to the config struct should thus not
> > have any functional impact. The change does however affect the RtcEventLog, since
> > that is used for storing the VideoReceiveStream::Configs. For simplicity,
> > this CL does not change the event log proto definitions, instead duplicating
> > the serialized RTX SSRCs such that they fit in the existing proto definition.
> >
> > BUG=webrtc:7011
> >
> > Review-Url: https://codereview.webrtc.org/2646073004
> > Cr-Commit-Position: refs/heads/master@{#16302}
> > Committed: fe2bef39cd
>
> TBR=stefan@webrtc.org,magjed@webrtc.org,terelius@webrtc.org,brandtr@webrtc.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=webrtc:7011
>
> Review-Url: https://codereview.webrtc.org/2649323010
> Cr-Commit-Position: refs/heads/master@{#16307}
> Committed: e4974953ceTBR=stefan@webrtc.org,magjed@webrtc.org,terelius@webrtc.org,kjellander@webrtc.org,kjellander@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
# NOTREECHECKS=true
# NOTRY=true
BUG=webrtc:7011
Review-Url: https://codereview.webrtc.org/2654163006
Cr-Commit-Position: refs/heads/master@{#16322}
Reason for revert:
Breaks internal downstream project.
Original issue's description:
> Make RTX pt/apt reconfigurable by calling WebRtcVideoChannel2::SetRecvParameters.
>
> Prior to this CL, received RTX (associated) payload types were only configured
> when WebRtcVideoChannel2::AddRecvStream was called. In the same method, the RTX
> SSRC was set up.
>
> After this CL, the RTX (associated) payload types are set in
> WebRtcVideoChannel2::SetRecvParameters, which is the appropriate place to set
> them. The RTX SSRC is still set in WebRtcVideoChannel2::AddRecvStream, since
> that is the code path that sets other SSRCs.
>
> As part of this fix, the VideoReceiveStream::Config::Rtp struct is changed.
> We remove the possibility for each video payload type to have an associated
> specific RTX SSRC. Although the config previously allowed for this, all payload
> types always had the same RTX SSRC set, and the underlying RtpPayloadRegistry
> did not support multiple SSRCs. This change to the config struct should thus not
> have any functional impact. The change does however affect the RtcEventLog, since
> that is used for storing the VideoReceiveStream::Configs. For simplicity,
> this CL does not change the event log proto definitions, instead duplicating
> the serialized RTX SSRCs such that they fit in the existing proto definition.
>
> BUG=webrtc:7011
>
> Review-Url: https://codereview.webrtc.org/2646073004
> Cr-Commit-Position: refs/heads/master@{#16302}
> Committed: fe2bef39cdTBR=stefan@webrtc.org,magjed@webrtc.org,terelius@webrtc.org,brandtr@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:7011
Review-Url: https://codereview.webrtc.org/2649323010
Cr-Commit-Position: refs/heads/master@{#16307}
Prior to this CL, received RTX (associated) payload types were only configured
when WebRtcVideoChannel2::AddRecvStream was called. In the same method, the RTX
SSRC was set up.
After this CL, the RTX (associated) payload types are set in
WebRtcVideoChannel2::SetRecvParameters, which is the appropriate place to set
them. The RTX SSRC is still set in WebRtcVideoChannel2::AddRecvStream, since
that is the code path that sets other SSRCs.
As part of this fix, the VideoReceiveStream::Config::Rtp struct is changed.
We remove the possibility for each video payload type to have an associated
specific RTX SSRC. Although the config previously allowed for this, all payload
types always had the same RTX SSRC set, and the underlying RtpPayloadRegistry
did not support multiple SSRCs. This change to the config struct should thus not
have any functional impact. The change does however affect the RtcEventLog, since
that is used for storing the VideoReceiveStream::Configs. For simplicity,
this CL does not change the event log proto definitions, instead duplicating
the serialized RTX SSRCs such that they fit in the existing proto definition.
BUG=webrtc:7011
Review-Url: https://codereview.webrtc.org/2646073004
Cr-Commit-Position: refs/heads/master@{#16302}
Also rename it from pacer_thread_ to congestion_controller_thread_.
BUG=webrtc:6847
Review-Url: https://codereview.webrtc.org/2637783003
Cr-Commit-Position: refs/heads/master@{#16134}
This CL adds an RTP module to FlexfecReceiveStreamImpl, and wires it up
to send RTCP RRs. It further makes some methods take const refs instead
of values, to make it more clear where packet copies are made. This
change reduces the number of copies by one, for the case when media
packets are added to the FlexFEC receiver.
The end-to-end test is modified to check for RTCP RRs being sent.
Part of this modification involves some indentation changes, and the
diff thus looks bigger than it logically is.
BUG=webrtc:5654
Review-Url: https://codereview.webrtc.org/2625633003
Cr-Commit-Position: refs/heads/master@{#16106}
That object will be used when we enable RTCP reporting from FlexfecReceiveStream.
Other related changes:
- Stop using FlexfecConfig (from config.h) at receive side in WebRtcVideoEngine2.
- Add a IsCompleteAndEnabled() method to FlexfecReceiveStream::Config, to be
used in WebRtcVideoEngine2.
- Centralize the construction of the FlexfecReceiveStream::Config in unit tests.
This will make future additions to the unit tests cleaner.
- Simplify setup for receiving FlexFEC in VideoQualityTest.
BUG=webrtc:5654
Review-Url: https://codereview.webrtc.org/2589713003
Cr-Commit-Position: refs/heads/master@{#16059}
Reason for revert:
Doing a reland where systeminfo.cc includes basictypes.h so that CPU_X86 etc. are defined when they are checked/used.
Original issue's description:
> Revert of Replace basictypes.h with stdint.h for int_t types. (patchset #1 id:1 of https://codereview.webrtc.org/2604043002/ )
>
> Reason for revert:
> Very likely cause of Chromium import bot breakage (unused function '__cpuid'), TBD why.
>
> Original issue's description:
> > Replace basictypes.h with stdint.h for int_t types.
> >
> > Removes basictypes.h for types that only makes use of it for fixed-size-int
> > typedefs and replaces it with stdint.h.
> >
> > BUG=webrtc:6853
> > R=tommi@webrtc.org
> >
> > Review-Url: https://codereview.webrtc.org/2604043002
> > Cr-Commit-Position: refs/heads/master@{#15867}
> > Committed: 7fd1a75300
>
> TBR=tommi@webrtc.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=webrtc:6853
>
> Review-Url: https://codereview.webrtc.org/2603203003
> Cr-Commit-Position: refs/heads/master@{#15869}
> Committed: 7eb0e23bcf
BUG=webrtc:6853
TBR=tommi@webrtc.org
Review-Url: https://codereview.webrtc.org/2609783002
Cr-Commit-Position: refs/heads/master@{#15873}
Reason for revert:
Very likely cause of Chromium import bot breakage (unused function '__cpuid'), TBD why.
Original issue's description:
> Replace basictypes.h with stdint.h for int_t types.
>
> Removes basictypes.h for types that only makes use of it for fixed-size-int
> typedefs and replaces it with stdint.h.
>
> BUG=webrtc:6853
> R=tommi@webrtc.org
>
> Review-Url: https://codereview.webrtc.org/2604043002
> Cr-Commit-Position: refs/heads/master@{#15867}
> Committed: 7fd1a75300TBR=tommi@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6853
Review-Url: https://codereview.webrtc.org/2603203003
Cr-Commit-Position: refs/heads/master@{#15869}
Removes basictypes.h for types that only makes use of it for fixed-size-int
typedefs and replaces it with stdint.h.
BUG=webrtc:6853
R=tommi@webrtc.org
Review-Url: https://codereview.webrtc.org/2604043002
Cr-Commit-Position: refs/heads/master@{#15867}
- UpdateRtcpList
- RtpToNtp
class RtpToNtpEstimator
- UpdateMeasurements
- Estimate
List with rtcp measurements is now private.
BUG=none
Review-Url: https://codereview.webrtc.org/2574133003
Cr-Commit-Position: refs/heads/master@{#15762}
Problem fixed: RTP header extensions were not properly set in tests.
BUG=webrtc:5654
Review-Url: https://codereview.webrtc.org/2593963003
Cr-Commit-Position: refs/heads/master@{#15741}
Also rename internal::FlexfecReceiveStream to FlexfecReceiveStreamImpl.
BUG=webrtc:6849
Review-Url: https://codereview.webrtc.org/2561123002
Cr-Commit-Position: refs/heads/master@{#15666}
A decision was recently made to limit downscaling to 320x180 on
Android. This causes the perf tests to fail. This test is no
longer valid on android, as the failure is expected behaviour.
BUG=None
NOTRY=true
TBR=phoglund@webrtc.org
Review-Url: https://codereview.webrtc.org/2563913003
Cr-Commit-Position: refs/heads/master@{#15510}
And delete the method CongestionController::packet_router.
BUG=None
Review-Url: https://codereview.webrtc.org/2516983004
Cr-Commit-Position: refs/heads/master@{#15323}
There's no longer any need to make the two arguments have the same
signedness, so we can drop the "u" suffix on literal integer
arguments.
NOPRESUBMIT=true
BUG=webrtc:6645
Review-Url: https://codereview.webrtc.org/2535593002
Cr-Commit-Position: refs/heads/master@{#15280}
Reason for revert:
Unfortunately, this change breaks internal projects. Specifically the change to the CongestionController interface means anything implementing it will be forced to change in lock-step.
Original issue's description:
> Pass time constanct to bwe smoothing filter.
>
> BUG=webrtc:6443, webrtc:6303
>
> Committed: https://crrev.com/9abbf5ae4ec7d688a9b4aa03a405f3faadb74b90
> Cr-Commit-Position: refs/heads/master@{#15266}
TBR=minyue@webrtc.org,stefan@webrtc.org,solenberg@webrtc.org,michaelt@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6443, webrtc:6303
Review-Url: https://codereview.webrtc.org/2532993002
Cr-Commit-Position: refs/heads/master@{#15272}
transport.h defines an interface for sending rtp and rtcp packets,
which is used by MediaChannel in webrtc/media/engine,
{Audio|Video}{Send|Receive}Stream and in a few other
places. It was part of the build target //webrtc:webrtc, which is a monolithic target with
all webrtc production code. This CL moves the header to its own target in webrtc/api
and deprecates the old location.
Targets in webrtc/api should in general only depend on other
targets in webrtc/api. The target webrtc/api:call_api depends on
transport.h. This change also makes webrtc/voice_engine pass GN's header
include checker and is needed in order for webrtc/api:call_api to pass
it.
transport.h will be completely removed in a follow-up CL in a few weeks
after clients have updated their includes.
NOTRY=True
BUG=webrtc:5589, webrtc:5878, webrtc:6785
Review-Url: https://codereview.webrtc.org/2426563003
Cr-Commit-Position: refs/heads/master@{#15267}
