The old AcmOpusTest depends on the ACMOpus class, but this class was
obsoleted by AudioEncoderOpus. In this CL, the test code is re-written
to use AudioEncoderOpus and ACMGenericCodecWrapper instead of
ACMOpus. Most of the test functionality is preserved, except for the
packet loss rate tests, which where already transferred to
AudioEncoderOpusTest in r8244.
R=kwiberg@webrtc.org, minyue@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/40029004
Cr-Commit-Position: refs/heads/master@{#8410}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8410 4adac7df-926f-26a2-2b94-8c16560cd09d
Although sample_rate_hz(), num_channels(), and rtp_timestamp_rate_hz()
are simple accessors for almost all implementations of AudioEncoder,
they are virtual and not guaranteed to be just simple accessors. Thus,
it makes more sense to use the normal CamelCase naming scheme.
BUG=4235
R=henrik.lundin@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/34239004
Cr-Commit-Position: refs/heads/master@{#8407}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8407 4adac7df-926f-26a2-2b94-8c16560cd09d
In some cases it was not possible to set another payload type for CNG
than the default one. This CL fixes this. The problem was also
dependent on whether the comfort noise codec was registered before or
after the speech codec.
A test is implement to expose the bug, registering comfort noise at a
non-default payload type, and both before and after the speech codec.
BUG=4228
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/35199004
Cr-Commit-Position: refs/heads/master@{#8380}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8380 4adac7df-926f-26a2-2b94-8c16560cd09d
The macro is in C defined as
#define WEBRTC_SPL_MUL_16_16(a, b) ((int32_t) (((int16_t)(a)) * ((int16_t)(b))))
(For definition on ARMv7 and MIPS, see common_audio/signal_processing/include/spl_inl_armv7.h and common_audio/signal_processing/include/spl_inl_mips.h)
The replacement consists of
- avoiding casts to int16_t if inputs already are int16_t
- adding explicit cast to <type> if result is assigned to <type> (other than int or int32_t)
Some other minor code cleanup also exists.
BUG=3348, 3353
TESTED=locally on Mac and trybots
R=henrik.lundin@webrtc.org, kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/34179004
Cr-Commit-Position: refs/heads/master@{#8358}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8358 4adac7df-926f-26a2-2b94-8c16560cd09d
This change switches from the old codec wrapper ACMISAC to the new
AudioEncoderIsac wrapped in an ACMGenericCodecWrapper.
This is also the CL where the old codec for producing redundancy (RED)
is inactivated. All RED payloads are now produces through the
AudioEncoderCopyRed or AudioEncoderIsacRed classes.
BUG=4228
TEST=Please, try the iSAC codec extensively.
COAUTHOR=kwiberg@webrtc.orgR=tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/33249005
Cr-Commit-Position: refs/heads/master@{#8342}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8342 4adac7df-926f-26a2-2b94-8c16560cd09d
This change switches from the old codec wrappers ACMPCMU and ACMPCMA
to the new AudioEncoderPcmU and AudioEncoderPcmA wrapped in an
ACMGenericCodecWrapper. RED and CNG is also switched to using their
AudioEncoder implementations (AudioEncoderCopyRed and AudioEncoderCng,
respectively), when RED and/or CNG is combined with PCM u/A.
This is the first in a series of changes that will switch all codecs
to use the new AudioEncoder interface.
BUG=4228
COAUTHOR=kwiberg@webrtc.orgR=minyue@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/33209004
Cr-Commit-Position: refs/heads/master@{#8268}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8268 4adac7df-926f-26a2-2b94-8c16560cd09d
This test will replace AcmOpusTest when ACMOpus is removed. The old
AcmOpusTest also contains tests for setting and updating the
"application" setting in Opus. However, in the new AudioEncoderOpus
class, the application is trivially set in the Config struct at
construction, wherefore a test is no longer needed.
BUG=3926
R=minyue@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37929004
Cr-Commit-Position: refs/heads/master@{#8244}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8244 4adac7df-926f-26a2-2b94-8c16560cd09d
Changes differing from https://webrtc-codereview.appspot.com/37859004:
* I put the include_tests==1 stuff of audio_coding.gypi in its
own audio_coding_tests.gypi file, including the Android and isolate
targets which were incorrectly located in the previous CL
* I moved the bwe utilities in remote_bitrate_estimator.gypi
into include_tests==1 since they depend on test.gyp after I
cleaned up the duplicated inclusion of rtp_file_reader.cc
R=stefan@webrtc.orgTBR=tina.legrand@webrtc.org
TESTED=Passing gyp and compile using:
webrtc/build/gyp_webrtc -Dinclude_tests=1
webrtc/build/gyp_webrtc -Dinclude_tests=0
I also setup a Chromium checkout with my checkout mounted in
third_party/webrtc and ran build/gyp_chromium successfully.
BUG=4185
Review URL: https://webrtc-codereview.appspot.com/33159004
Cr-Commit-Position: refs/heads/master@{#8205}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8205 4adac7df-926f-26a2-2b94-8c16560cd09d
- Add max_bit_rate and max_payload_size_bytes to config structs.
- Fix support for 48 kHz sample rate.
- Fix iSAC-RED.
- Add method UpdateDecoderSampleRate().
- Update locking structure with a separate lock for local member
variables used by the encoder methods.
BUG=3926
COAUTHOR:kwiberg@webrtc.orgR=minyue@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41659004
Cr-Commit-Position: refs/heads/master@{#8204}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8204 4adac7df-926f-26a2-2b94-8c16560cd09d
This fixes a two year old TODO of deleting dead code :)
In cases where the _id or id_ member variable is being used for tracing,
I changed the member to at least be const.
It doesn't look like id's are that useful anymore so maybe the next step is to get rid of them.
BUG=
R=henrika@webrtc.org, perkj@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37849004
Cr-Commit-Position: refs/heads/master@{#8201}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8201 4adac7df-926f-26a2-2b94-8c16560cd09d
This required to move the AGC tools source files
into webrtc/tools and create a new agc_test_utils target.
Since audio_codec_speed_tests.gypi referenced sources above,
the best approach I could come up with was to add an audio_coding.gypi
file at a higher level and move the targets in there (+ the includes from
modules.gyp which is an improvement IMO).
I also added a PRESUBMIT.py check to prevent new source
entries being added with <(webrtc_root) in the path.
BUG=4185
R=andrew@webrtc.org, tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37859004
Cr-Commit-Position: refs/heads/master@{#8197}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8197 4adac7df-926f-26a2-2b94-8c16560cd09d
