To replace the SmoothsRenderedFrames method, added a corresponding
flag to VideoReceiveStream::Config instead.
BUG=webrtc:5426
Review URL: https://codereview.webrtc.org/1818023002
Cr-Commit-Position: refs/heads/master@{#12102}
This will allow a sender to stop/start sending media on the
application's demand.
Among other things, this can allow an application to set a track on a
sender while the encoding(s) are inactive, allowing the encoder to be
initialized for that track, then later set the encodings to "active"
to instantly start sending the track.
Review URL: https://codereview.webrtc.org/1822923002
Cr-Commit-Position: refs/heads/master@{#12094}
This change enables voice-only calls to keep track of the network state.
This is only a partial fix - the last modality to change state controls
the state for the entire call, so a call with a failed video transport
will also stop sending audio packets. Handling this condition correctly
would require the call to keep track of network state for each media
type separately, and take care of conditions such as a failed video
channel getting removed, while a functioning audio channel remains.
BUG=webrtc:5307
Review URL: https://codereview.webrtc.org/1757683002
Cr-Commit-Position: refs/heads/master@{#12093}
Un-breaks peerconnection_client which would instantly use-after-free on
an allocated VCM because it wasn't building a scoped_refptr so all
references to the VCM were dropped.
BUG=webrtc:5229
TBR=tommi@webrtc.org
TEST=Run peerconnection_client locally, verify that there's no crash.
Review URL: https://codereview.webrtc.org/1817953005 .
Cr-Commit-Position: refs/heads/master@{#12088}
Reason for revert:
Breaks RTCVideoEncoder which has incorrect assumptions on where InitEncode etc. is called from. Temporarily reverting until RTCVideoEncoder has been updated.
Original issue's description:
> Initialize/configure video encoders asychronously.
>
> Greatly speeds up setRemoteDescription() by moving encoder initialization
> off the main worker thread, which is free to move onto gathering ICE
> candidates and other tasks while InitEncode() is performed. It also
> un-blocks PeerConnection GetStats() which is no longer blocked on
> encoder initialization.
>
> BUG=webrtc:5410
> R=stefan@webrtc.org
>
> Committed: fb647a67beR=stefan@webrtc.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=chromium:595274, chromium:595308, webrtc:5410
Review URL: https://codereview.webrtc.org/1821983002 .
Cr-Commit-Position: refs/heads/master@{#12086}
webrtc::VideoRenderer class, replacing it by rtc::VideoSinkInterface.
The next step is to convert all places where a renderer is attached to
rtc::VideoSourceInterface, and at that point, the
SmoothsRenderedFrames method can be replaced by a flag
rtc::VideoSinkWants::smoothed_frames.
Delete unused method IsTextureSupported.
Delete unused time argument to RenderFrame.
Let webrtc::VideoRenderer inherit rtc::VideoSinkInterface. Rename RenderFrame --> OnFrame.
TBR=kjellander@webrtc.org
BUG=webrtc:5426
Review URL: https://codereview.webrtc.org/1814763002
Cr-Commit-Position: refs/heads/master@{#12070}
This CL removes copy and assign support from Buffer and changes various
parameters from Buffer to CopyOnWriteBuffer so they can be passed along
and copied without actually copying the underlying data.
With this changed some parameters to be "const" and fixed an issue when
creating a CopyOnWriteBuffer with empty data.
BUG=webrtc:5155
Review URL: https://codereview.webrtc.org/1823503002
Cr-Commit-Position: refs/heads/master@{#12062}
Reason for revert:
I'm really sorry for having to revert this but it seems this hit an unexpected compile error downstream:
webrtc/media/sctp/sctpdataengine.cc: In function 'void cricket::VerboseLogPacket(const void*, size_t, int)':
webrtc/media/sctp/sctpdataengine.cc:172:37: error: invalid conversion from 'const void*' to 'void*' [-fpermissive]
data, length, direction)) != NULL) {
^
In file included from webrtc/media/sctp/sctpdataengine.cc:20:0:
third_party/usrsctp/usrsctplib/usrsctp.h:964:1: error: initializing argument 1 of 'char* usrsctp_dumppacket(void*, size_t, int)' [-fpermissive]
usrsctp_dumppacket(void *, size_t, int);
^
I'm sure you can fix this easily and just re-land this CL, while I'm going to look into how to add this warning at the public bots (on Monday).
Original issue's description:
> Use CopyOnWriteBuffer instead of Buffer to avoid unnecessary copies.
>
> This CL removes copy and assign support from Buffer and changes various
> parameters from Buffer to CopyOnWriteBuffer so they can be passed along
> and copied without actually copying the underlying data.
>
> With this changed some parameters to be "const" and fixed an issue when
> creating a CopyOnWriteBuffer with empty data.
>
> BUG=webrtc:5155
>
> Committed: https://crrev.com/944c39006f1c52aee20919676002dac7a42b1c05
> Cr-Commit-Position: refs/heads/master@{#12058}
TBR=kwiberg@webrtc.org,tkchin@webrtc.org,tommi@webrtc.org,pthatcher@webrtc.org,jbauch@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:5155
Review URL: https://codereview.webrtc.org/1817753003
Cr-Commit-Position: refs/heads/master@{#12060}
This CL removes copy and assign support from Buffer and changes various
parameters from Buffer to CopyOnWriteBuffer so they can be passed along
and copied without actually copying the underlying data.
With this changed some parameters to be "const" and fixed an issue when
creating a CopyOnWriteBuffer with empty data.
BUG=webrtc:5155
Review URL: https://codereview.webrtc.org/1785713005
Cr-Commit-Position: refs/heads/master@{#12058}
It appears that the adapt_frame_drops, effects_frame_drops, and capturer_frame_time statistics are never used. They are collected by cricket::VideoCapturer, and copied into VideoSenderInfo by the VideoMediaChannel::GetStats method.
So delete the code to generate the statistics, and the VariableInfo template which had no other uses.
BUG=webrtc:5426
R=pbos@webrtc.org, pthatcher@webrtc.org
Review URL: https://codereview.webrtc.org/1804133003 .
Cr-Commit-Position: refs/heads/master@{#12032}
This change allows the application to limit the bitrate of the outgoing
audio and video streams at runtime. The API roughly follows the WebRTC
API draft, defining the RTCRtpParameters structure witn exactly one
encoding (simulcast streams are not exposed in the API for now).
(https://www.w3.org/TR/webrtc/#idl-def-RTCRtpParameters)
BUG=
Review URL: https://codereview.webrtc.org/1788583004
Cr-Commit-Position: refs/heads/master@{#12025}
Greatly speeds up setRemoteDescription() by moving encoder initialization
off the main worker thread, which is free to move onto gathering ICE
candidates and other tasks while InitEncode() is performed. It also
un-blocks PeerConnection GetStats() which is no longer blocked on
encoder initialization.
BUG=webrtc:5410
R=stefan@webrtc.org
Review URL: https://codereview.webrtc.org/1757313002 .
Cr-Commit-Position: refs/heads/master@{#11983}
- Change argument type to int for SetSendTelephoneEventPayloadType()
BUG=webrtc:4690
Review URL: https://codereview.webrtc.org/1798903002
Cr-Commit-Position: refs/heads/master@{#11980}
Permits sending faster when having an attached track before actually
sending since the configured stream is ready to encode as soon as a call
is accepted.
BUG=webrtc:5410
R=deadbeef@webrtc.org
Review URL: https://codereview.webrtc.org/1790703002 .
Cr-Commit-Position: refs/heads/master@{#11963}
- Use better types in AudioSendStream::SendTelephoneEvent() and related methods.
BUG=webrtc:4690
Review URL: https://codereview.webrtc.org/1782053002
Cr-Commit-Position: refs/heads/master@{#11953}
This enabled us to be able to remove VideoTrack::GetSink and RemoteVideoCapturer.
Since video frames from the decoder is delivered on a media engine internal thread, VideoBroadCaster must be made thread safe.
BUG=webrtc:5426
R=deadbeef@webrtc.org, pthatcher@webrtc.org
Review URL: https://codereview.webrtc.org/1765423005 .
Cr-Commit-Position: refs/heads/master@{#11944}
- Use better types in AudioSendStream::SendTelephoneEvent() and related methods.
BUG=webrtc:4690
Review URL: https://codereview.webrtc.org/1722253002
Cr-Commit-Position: refs/heads/master@{#11927}
At the top level, setting a track on an RtpSender is equivalent to
setting a source (previously called a renderer)
on a voice send stream. An RtpSender without a track
is not supposed to send data (not even muted data), so a send stream without
a source shouldn't send data.
Also replacing SendFlags with a boolean and implementing "Start"
and "Stop" methods on AudioSendStream, which was planned anyway
and simplifies this CL.
R=pthatcher@webrtc.org, solenberg@webrtc.org
Review URL: https://codereview.webrtc.org/1741933002 .
Cr-Commit-Position: refs/heads/master@{#11918}
This copies the contents (unittest excluded) of base/numerics in
chromium to base/numerics in webrtc. Files added:
- safe_conversions.h
- safe_conversions_impl.h
- safe_math.h
- safe_math_impl.h
A really old version of safe_conversions[_impl].h previously existed in
base/, this has been deleted and sources using it have been updated
to include the new base/numerics/safe_converions.h.
This CL also adds a DEPS file to webrtc/base.
NOPRESUBMIT=True
BUG=webrtc:5548, webrtc:5623
Review URL: https://codereview.webrtc.org/1753293002
Cr-Commit-Position: refs/heads/master@{#11907}
Also moves and simplifies SetSendCodec from VideoSendStream to mostly
inside ViEEncoder. This is necessary for making
ReconfigureVideoEncoder asynchronous as we don't post any result back.
BUG=webrtc:5494
R=stefan@webrtc.orgTBR=mflodman@webrtc.org
Review URL: https://codereview.webrtc.org/1754283002 .
Cr-Commit-Position: refs/heads/master@{#11847}
Multiple sources with the same names forces ugly GYP hacks in
Chromium's libjingle.gyp. Rename the sources in WebRTC to
enable cleaning this up in Chromium.
To summarize:
webrtc/media/base/constants.{cc,h} -> mediaconstants.{cc,h}
webrtc/p2p/base/constants.{cc,h} -> p2pconstants.{cc,h}
This CL will require coordinating landing a roll in Chromium.
BUG=webrtc:4256
NOTRY=True
Review URL: https://codereview.webrtc.org/1750593002
Cr-Commit-Position: refs/heads/master@{#11842}
This cl copies the value of cricket::VideoCapturer::IsScreencast into
a flag in VideoOptions. It is passed on via the chain
VideortpSender::SetVideoSend
WebRtcVideoChannel2::SetVideoSend
WebRtcVideoChannel2::SetOptions
WebRtcVideoChannel2::WebRtcVideoSendStream::SetOptions
Where it's used, in
WebRtcVideoChannel2::WebRtcVideoSendStream::OnFrame, we can look it up
in parameters_, instead of calling capturer_->IsScreencast().
Doesn't touch screencast logic related to cpu adaptation, since that
code is in flux in a different cl.
Also drop the is_screencast flag from the Dimensions struct, and drop separate options argument from ConfigureVideoEncoderSettings and SetCodecAndOptions, instead always using the options recorded in VideoSendStreamParameters::options.
In the tests, changed FakeVideoCapturer::is_screencast to be a construction time flag. Generally, unittests of screencast have to both use a capturer configured for screencast, and set the screencast flag using SetSendParameters. Since the automatic connection via VideoSource and VideoRtpSender isn't involved in the unit tests.
Note that using SetSendParameters to set the screencast flag doesn't make sense, since it's not per-stream. SetVideoSend would be more appropriate. That should be fixed if/when we drop VideoOptions from SetSendParameters.
BUG=webrtc:5426
R=pbos@webrtc.org, perkj@webrtc.org, pthatcher@webrtc.org
Review URL: https://codereview.webrtc.org/1711763003 .
Cr-Commit-Position: refs/heads/master@{#11837}
Rename SetCodecAndOptions to SetCodec, it no longer sets or uses the
VideoOptions. In MediaConfig, collect the video-related flags into a
struct.
As a followup, it should be possible to delete VideoOptions from
VideoSendParameters and VideoSendStreamParameters.
TBR=pthatcher@webrtc.org
BUG=webrtc:5426
Review URL: https://codereview.webrtc.org/1745003002
Cr-Commit-Position: refs/heads/master@{#11828}
I readded virtual bool Pause(bool paused) for now with a dummy implementation since Chrome remoting override this method.
Original cl description:
Removed unused cricket::VideoCapturer methods:
void UpdateAspectRatio(int ratio_w, int ratio_h);
void ClearAspectRatio();
bool Pause(bool paused);
Restart(const VideoFormat& capture_format);
MuteToBlackThenPause(bool muted);
IsMuted() const
set_square_pixel_aspect_ratio
bool square_pixel_aspect_ratio()
This cl also remove the use of messages and posting of state change.
Further more - a thread checker is added to make sure methods are called on only one thread. Construction can happen on a separate thred.
It does not add restrictions on what thread frames are delivered on though.
There is more features in VideoCapturer::Onframe related to screen share in ARGB that probably can be cleaned up in a follow up cl.
BUG=webrtc:5426
TBR=pthatcher@webrtc.org
Review URL: https://codereview.webrtc.org/1744153002 .
Cr-Commit-Position: refs/heads/master@{#11809}
The purose of this cl is to remove dependency on cricket::VideoCapturer from WebRtcVideoChannel2.
This cl change CPU adaptation to use a new VideoSinkWants.Resolution
Cl is WIP and uploaded to start the discussion.
Tested on a N5 with hw acceleration turned off.
BUG=webrtc:5426
Review URL: https://codereview.webrtc.org/1695263002
Cr-Commit-Position: refs/heads/master@{#11804}
Reason for revert:
Breaks downstream compilation. Please make non-breaking API changes for the reland or coordinate fixing downstream code quickly with the sheriff.
Original issue's description:
> Cleanup of webrtc::VideoFrame.
>
> Delete EqualsFrame method, used only by tests. Delete one of the
> CreateFrame methods. Drop return value for CreateEmptyFrame, CreateFrame
> and CopyFrame.
>
> BUG=webrtc:5426
>
> Committed: https://crrev.com/208019637bfed975f8f13b16d40b90e200763cd6
> Cr-Commit-Position: refs/heads/master@{#11783}
TBR=pbos@webrtc.org,perkj@webrtc.org,pthatcher@webrtc.org,mflodman@webrtc.org,marpan@webrtc.org,nisse@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:5426
Review URL: https://codereview.webrtc.org/1743613002
Cr-Commit-Position: refs/heads/master@{#11789}
Delete EqualsFrame method, used only by tests. Delete one of the
CreateFrame methods. Drop return value for CreateEmptyFrame, CreateFrame
and CopyFrame.
BUG=webrtc:5426
Review URL: https://codereview.webrtc.org/1679323002
Cr-Commit-Position: refs/heads/master@{#11783}
Reason for revert:
Breaks remoting::protocol::WebrtcVideoCapturerAdapter::Pause'
See https://build.chromium.org/p/chromium.webrtc.fyi/builders/Win%20Builder/builds/3689/steps/compile/logs/stdio
Original issue's description:
> Removed unused cricket::VideoCapturer methods:
>
> void UpdateAspectRatio(int ratio_w, int ratio_h);
> void ClearAspectRatio();
> ool Pause(bool paused);
> Restart(const VideoFormat& capture_format);
> MuteToBlackThenPause(bool muted);
> IsMuted() const
> set_square_pixel_aspect_ratio
> bool square_pixel_aspect_ratio()
>
> This cl also remove the use of messages and posting of state change.
> Further more - a thread checker is added to make sure methods are called on only one thread. Construction can happen on a separate thred.
> It does not add restrictions on what thread frames are delivered on though.
>
> There is more features in VideoCapturer::Onframe related to screen share in ARGB that probably can be cleaned up in a follow up cl.
>
> BUG=webrtc:5426
>
> Committed: https://crrev.com/e9c0cdff2dad2553b6ff6820c0c7429cb2854861
> Cr-Commit-Position: refs/heads/master@{#11773}
TBR=magjed@webrtc.org,pthatcher@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:5426
Review URL: https://codereview.webrtc.org/1740963002
Cr-Commit-Position: refs/heads/master@{#11777}
void UpdateAspectRatio(int ratio_w, int ratio_h);
void ClearAspectRatio();
ool Pause(bool paused);
Restart(const VideoFormat& capture_format);
MuteToBlackThenPause(bool muted);
IsMuted() const
set_square_pixel_aspect_ratio
bool square_pixel_aspect_ratio()
This cl also remove the use of messages and posting of state change.
Further more - a thread checker is added to make sure methods are called on only one thread. Construction can happen on a separate thred.
It does not add restrictions on what thread frames are delivered on though.
There is more features in VideoCapturer::Onframe related to screen share in ARGB that probably can be cleaned up in a follow up cl.
BUG=webrtc:5426
Review URL: https://codereview.webrtc.org/1733673002
Cr-Commit-Position: refs/heads/master@{#11773}
Reason for revert:
Revert breaks other uses, a fix will be rolled into Chromium instead.
Original issue's description:
> Revert of Remove ignored return code from modules. (patchset #3 id:40001 of https://codereview.webrtc.org/1703833002/ )
>
> Reason for revert:
> Breaks Chromium.
>
> Original issue's description:
> > Remove ignored return code from modules.
> >
> > ModuleProcessImpl doesn't act on return codes and having them around is
> > confusing (it's unclear what an error return code here would do even).
> >
> > BUG=
> > R=tommi@webrtc.org
> >
> > Committed: f14c47a58c
>
> TBR=tommi@webrtc.org,pbos@webrtc.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=
>
> Committed: https://crrev.com/da33a8a2a22f6d19ba2a8cce963beafbdbaa8fd8
> Cr-Commit-Position: refs/heads/master@{#11761}
TBR=tommi@webrtc.org,torbjorng@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.webrtc.org/1737013002
Cr-Commit-Position: refs/heads/master@{#11762}
Reason for revert:
Breaks Chromium.
Original issue's description:
> Remove ignored return code from modules.
>
> ModuleProcessImpl doesn't act on return codes and having them around is
> confusing (it's unclear what an error return code here would do even).
>
> BUG=
> R=tommi@webrtc.org
>
> Committed: f14c47a58cTBR=tommi@webrtc.org,pbos@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.webrtc.org/1736663004
Cr-Commit-Position: refs/heads/master@{#11761}
