The IceEndpointType has the format of <local_endpoint>_<remote_endpoint>. It is recorded on the BestConnection when we have the first OnTransportCompleted signaled.
BUG=webrtc:4918
R=pthatcher@webrtc.org
Review URL: https://codereview.webrtc.org/1277263002 .
Cr-Commit-Position: refs/heads/master@{#9737}
This reverts commit 0a2955f227666efd87b2a303a69c083ef801c528.
Revert "In the past, P2PPortAllocator.enable_multiple_routes is the indicator whether we should bind to the any address. It's easy to translate that into a port allocator flag in P2PPortAllocator's ctor. Going forward, we have to depend on an asynchronous permission check to determine whether gathering local address is allowed or not, hence the current way of passing it through constructor approach won't work any more. The asynchronous check will trigger SignalNetowrksChanged so we could only check that inside DoAllocate."
This reverts commit ba9ab4cd8d2e8fbc068dc36b5e6f6331d7deeccf.
TBR=pthatcher@webrtc.org
Review URL: https://codereview.webrtc.org/1288843003 .
Cr-Commit-Position: refs/heads/master@{#9729}
Sometimes the port still try to send stun packet when the connection is disconnected,
causing an assertion error.
BUG=4859
Review URL: https://codereview.webrtc.org/1247573002
Cr-Commit-Position: refs/heads/master@{#9671}
This was already working in most cases, but not for some corner cases:
* If the PORTALLOCATOR_ENABLE_SHARED_SOCKET flag is not set
* If both a STUN server and TURN server are configured
I added unit tests for these cases, and centralized the code that gets
STUN server addresses in order to fix these and any related issues.
BUG=webrtc:4215
Review URL: https://codereview.webrtc.org/1215713003
Cr-Commit-Position: refs/heads/master@{#9596}
2. provide an implementation for SetIceConnectionReceivingTimeout so that Chrome does not complain.
BUG=
Review URL: https://codereview.webrtc.org/1227843006
Cr-Commit-Position: refs/heads/master@{#9574}
Connection can be resurrected with current code when there is no any existing connection for the same address. However, it's always resurrected with prflx candidate priority hence the new connection could bump down other better connection.
Migrated from https://webrtc-codereview.appspot.com/51959004/
This is based on test cases added for triggered checks.
BUG=webrtc:4724
R=pthatcher@webrtc.org
Review URL: https://codereview.webrtc.org/1172483002
Cr-Commit-Position: refs/heads/master@{#9429}
The current use of rtc::FifoBuffer can lead to reading across DTLS packet
boundaries which could cause packets to not being processed correctly.
This CL introduces the new class rtc::BufferQueue and changes the
StreamInterfaceChannel to use it instead of the rtc::FifoBuffer.
BUG=chromium:447431
R=juberti@google.com
Review URL: https://webrtc-codereview.appspot.com/52509004
Cr-Commit-Position: refs/heads/master@{#9254}
This CL adds an API to SSL stream adapters to set the maximum allowed
protocol version and with that implements support for DTLS 1.2.
With DTLS 1.2 the default cipher changes in the unittests as follows.
BoringSSL
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA -> TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
NSS
TLS_RSA_WITH_AES_128_CBC_SHA -> TLS_RSA_WITH_AES_128_GCM_SHA256
BUG=chromium:428343
R=juberti@google.com
Review URL: https://webrtc-codereview.appspot.com/50989004
Cr-Commit-Position: refs/heads/master@{#9232}
It was too spammy in the log because we have many code paths that check for responses when it's not a problem that it's not an expected response.
R=glaznev@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/47199004
Cr-Commit-Position: refs/heads/master@{#9212}
1. Constructors, SetData(), and AppendData() now accept uint8_t*,
int8_t*, and char*. Previously, they accepted void*, meaning that
any kind of pointer was accepted. I think requiring an explicit
cast in cases where the input array isn't already of a byte-sized
type is a better compromise between convenience and safety.
2. data() can now return a uint8_t* instead of a char*, which seems
more appropriate for a byte array, and is harder to mix up with
zero-terminated C strings. data<int8_t>() is also available so
that callers that want that type instead won't have to cast, as
is data<char>() (which remains the default until all existing
callers have been fixed).
3. Constructors, SetData(), and AppendData() now accept arrays
natively, not just decayed to pointers. The advantage of this is
that callers don't have to pass the size separately.
4. There are new constructors that allow setting size and capacity
without initializing the array. Previously, this had to be done
separately after construction.
5. Instead of TransferTo(), Buffer now supports swap(), and move
construction and assignment, and has a Pass() method that works
just like std::move(). (The Pass method is modeled after
scoped_ptr::Pass().)
R=jmarusic@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/42989004
Cr-Commit-Position: refs/heads/master@{#9033}
UDP case should not be changed.
Active TCPConnection will initiate Reconnect after OnClose and when Send or Ping fails.
Passive TCPConnection will prune itself as usual as the active side will create a new connection.
The Reconnect could make P2PCT choose a different best_connection in the case where connectivities exist b/w more than 1 Network.
Also, to avoid upper layer triggers ice restart, the WRITE_TIMEOUT caused by the socket disconnection is delayed to give the reconnect mechanism chance to kick in. The timeout event is only fired if the reconnect can't work in 5 sec. If the reconnect, there should be no ICE disconnected state trigger either in active or passive side.
BUG=1926
R=pthatcher@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/31359004
Cr-Commit-Position: refs/heads/master@{#8929}
And add a constructor for creating an uninitialized Buffer of a
specified size.
(I intend to follow up with more Buffer changes, but since it's rather
widely used, the rename is quite noisy and works better as a separate
CL.)
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/48579004
Cr-Commit-Position: refs/heads/master@{#8841}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8841 4adac7df-926f-26a2-2b94-8c16560cd09d
Also fixed the issue when we have an TransportChannelImpl, the socket
option is not preserved.
Since this is a code path that will be modified by bundle (which Peter also has a test case already), we don't need a test case here.
BUG=4374
R=pthatcher@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/42699004
Cr-Commit-Position: refs/heads/master@{#8702}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8702 4adac7df-926f-26a2-2b94-8c16560cd09d
Clang version changed 223108:230914
Details: e144d30..6fdb142/tools/clang/scripts/update.sh
Removes the OVERRIDE macro defined in:
* webrtc/base/common.h
* webrtc/typedefs.h
The majority of the source changes were done by running this in src/:
perl -0pi -e "s/virtual\s([^({;]*(\([^({;]*\)[^({;]*))(OVERRIDE|override)/\1override/sg" `find {talk,webrtc} -name "*.h" -o -name "*.cc*" -o -name "*.mm*"`
which converted all:
virtual Foo() OVERRIDE
functions to:
Foo() override
Then I manually edited:
* talk/media/webrtc/fakewebrtccommon.h
* webrtc/test/fake_common.h
Remaining uses of OVERRIDE was fixed by search+replace.
Manual edits were done to fix virtual destructors that were
overriding inherited ones.
Finally a build error related to the pure virtual definitions of
Read, Write and Rewind in common_types.h required a bit of
refactoring in:
* webrtc/common_types.cc
* webrtc/common_types.h
* webrtc/system_wrappers/interface/file_wrapper.h
* webrtc/system_wrappers/source/file_impl.cc
This roll should make it possible for us to finally re-enable deadlock
detection for TSan on the buildbots.
BUG=4106
R=pbos@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/41069004
Cr-Commit-Position: refs/heads/master@{#8596}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8596 4adac7df-926f-26a2-2b94-8c16560cd09d
WebRTC binds to individual NICs and listens for incoming Stun packets. Sending stun through this specific NIC binding could make OS route the packet differently hence exposing non-VPN public IP.
The fix here is
1. to bind to any address (0:0:0:0) instead. This way, the routing will be the same as how chrome/http is.
2. also, remove the any all 0s addresses which happens when we bind to all 0s.
BUG=4276
R=juberti@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/39129004
Cr-Commit-Position: refs/heads/master@{#8418}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8418 4adac7df-926f-26a2-2b94-8c16560cd09d
