Tests were failing on android with new libvpx.
vp9 speed setting was changed to 8 recently and some recent changes
in libvpx require update for the tests to pass.
TBR=stefan@webrtc.org
BUG=webrtc:5401
Review URL: https://codereview.webrtc.org/1569903002 .
Cr-Commit-Position: refs/heads/master@{#11173}
Macro incorrectly displays DISABLED_ON_ANDROID in test names for
parameterized tests under --gtest_list_tests, causing tests to be
disabled on all platforms since they contain the DISABLED_ prefix rather
than their expanded variants.
This expands the macro variants to inline if they're disabled or not,
and removes building some tests under configurations where they should
fail, instead of building them but disabling them by default.
The change also removes gtest_disable.h as an unused include from many
other files.
BUG=webrtc:5387, webrtc:5400
R=kjellander@webrtc.org, phoglund@webrtc.orgTBR=henrik.lundin@webrtc.org
Review URL: https://codereview.webrtc.org/1547343002 .
Cr-Commit-Position: refs/heads/master@{#11150}
At speed 8, vp9 on ARM is currently ~2x times slower than vp8 on ARM (speed -12).
Update some parameters in videoprocessor_integrationtest.cc
to make tests pass on android (which uses the new speed setting).
TBR=stefan@webrtc.org
BUG=
Review URL: https://codereview.webrtc.org/1526973004 .
Cr-Commit-Position: refs/heads/master@{#11072}
Specify kf_min_dist to get correct key frame interval in svc mode.
Also set QP-max/min per temporal and spatial layer (was previously only allowed to be set per spatial layer).
BUG=chromium:500602
R=stefan@webrtc.org
Review URL: https://codereview.webrtc.org/1492633005 .
Cr-Commit-Position: refs/heads/master@{#10890}
The callback keeps a reference to an object until the callback goes out of scope.
Review URL: https://codereview.webrtc.org/1487493002
Cr-Commit-Position: refs/heads/master@{#10847}
This makes it clearer this code not meant to be used as an API.
I could not find any use of this in downstream code.
BUG=webrtc:5095
TESTED=git cl try -c --bot=android_compile_rel --bot=linux_compile_rel --bot=win_compile_rel --bot=mac_compile_rel --bot=ios_rel --bot=linux_gn_rel --bot=win_x64_gn_rel --bot=mac_x64_gn_rel --bot=android_gn_rel -m tryserver.webrtc
R=stefan@webrtc.orgTBR=magjed@webrtc.org
Review URL: https://codereview.webrtc.org/1440873005 .
Cr-Commit-Position: refs/heads/master@{#10699}
The main purpose was the interface-> include rename, but other files
were also moved, eliminating the "main" dir.
To avoid breaking downstream, the "interface" directories were copied
into a new "video_coding/include" dir. The old headers got pragma
warnings added about deprecation (a very short deprecation since I plan
to remove them as soon downstream is updated).
Other files also moved:
video_coding/main/source -> video_coding
video_coding/main/test -> video_coding/test
BUG=webrtc:5095
TESTED=Passing compile-trybots with --clobber flag:
git cl try --clobber --bot=win_compile_rel --bot=linux_compile_rel --bot=android_compile_rel --bot=mac_compile_rel --bot=ios_rel --bot=linux_gn_rel --bot=win_x64_gn_rel --bot=mac_x64_gn_rel --bot=android_gn_rel -m tryserver.webrtc
R=stefan@webrtc.org, tommi@webrtc.org
Review URL: https://codereview.webrtc.org/1417283007 .
Cr-Commit-Position: refs/heads/master@{#10694}
Removes VP8::Encode trace in favor of VCMGenericEncoder ones and adds
one to InitEncode. Also adds an instant event to ::Encoded since this
can be done on a different thread.
Also adds the corresponding traces to VCMGenericDecoder.
BUG=webrtc:5167
R=stefan@webrtc.org
Review URL: https://codereview.webrtc.org/1412573010
Cr-Commit-Position: refs/heads/master@{#10674}
To avoid breaking downstream, the "interface" directories were copied
into a new "common_video/include" dir. The old headers got pragma
warnings added about deprecation (a very short deprecation since I plan
to remove them as soon downstream is updated).
The header guards are also identical to avoid mixing them up in the transition.
BUG=webrtc:5095
TESTED=Passing compile-trybots with --clobber flag:
git cl try --clobber --bot=win_compile_rel --bot=linux_compile_rel --bot=android_compile_rel --bot=mac_compile_rel --bot=ios_rel --bot=linux_gn_rel --bot=win_x64_gn_rel --bot=mac_x64_gn_rel --bot=android_gn_rel -m tryserver.webrtc
Review URL: https://codereview.webrtc.org/1418913006
Cr-Commit-Position: refs/heads/master@{#10659}
On Android, we would like to use MediaCodec output buffers to hold decoded frames until they can be rendered to a texture. There can only be one texture buffer used at the same time and therefore the calculated decode time in VCMTiming will be wrong since that calculation will also include the time where the decoder waited for the upper layers (that depend on network jitter and actual render time) to release the frame.
This new method will be used in
https://codereview.webrtc.org/1422963003/
BUG=webrtc:4993
R=stefan@webrtc.orgTBR=mflodman@webrtc.org
Review URL: https://codereview.webrtc.org/1414693006 .
Cr-Commit-Position: refs/heads/master@{#10576}
This changes the following module directories:
* webrtc/modules/audio_conference_mixer/interface
* webrtc/modules/interface
* webrtc/modules/media_file/interface
* webrtc/modules/rtp_rtcp/interface
* webrtc/modules/utility/interface
To avoid breaking downstream, I followed this recipe:
1. Copy the interface dir to a new sibling directory: include
2. Update the header guards in the include directory to match the style guide.
3. Update the header guards in the interface directory to match the ones in include. This is required to avoid getting redefinitions in the not-yet-updated downstream code.
4. Add a pragma warning in the header files in the interface dir. Example:
#pragma message("WARNING: webrtc/modules/interface is DEPRECATED; "
"use webrtc/modules/include")
5. Search for all source references to webrtc/modules/interface and update them to webrtc/modules/include (*.c*,*.h,*.mm,*.S)
6. Update all GYP+GN files. This required manual inspection since many subdirectories of webrtc/modules referenced the interface dir using ../interface etc(*.gyp*,*.gn*)
BUG=5095
TESTED=Passing compile-trybots with --clobber flag:
git cl try --clobber --bot=win_compile_rel --bot=linux_compile_rel --bot=android_compile_rel --bot=mac_compile_rel --bot=ios_rel -m tryserver.webrtc
R=stefan@webrtc.org, tommi@webrtc.org
Review URL: https://codereview.webrtc.org/1417683006 .
Cr-Commit-Position: refs/heads/master@{#10500}
This is a re-land of https://codereview.webrtc.org/1353263005/
which was reverted because of perf-regressions. Changes since that CL:
* Change LayerFilteringTransport to send a padding packet instead of
dropping it for data that should be filtered out. This prevents
confusion due to changed sequence numbers.
* Changed timing of stats poller thread in VideoAnalyzer. Startup was
racy wrt initializion of send_stream_.
* Minor formatting issues.
PERF NOTE: This change will affect some performance numbers slightly.
In particular, {encode_frame_rate, encode_time_ms,
encode_usage_percent, media_bitrate_bps} will change due to timing
of the measurements.
BUG=
R=pbos@webrtc.orgTBR=mflodman@webrtc.org
Review URL: https://codereview.webrtc.org/1412233003
Cr-Commit-Position: refs/heads/master@{#10483}
- "WebRTC.Video.BandwidthLimitedResolutionInPercent"
If the frame is bandwidth limited, the average number of disabled resolutions is logged:
- "WebRTC.Video.BandwidthLimitedResolutionsDisabled"
BUG=
Review URL: https://codereview.webrtc.org/1311533012
Cr-Commit-Position: refs/heads/master@{#10333}
- "WebRTC.Video.QualityLimitedResolutionInPercent"
and if a frame is downscaled, the average number of times the frame is downscaled:
- "WebRTC.Video.QualityLimitedResolutionDownscales"
BUG=
Review URL: https://codereview.webrtc.org/1325153009
Cr-Commit-Position: refs/heads/master@{#10319}
Implements SupportsNativeHandle() in SimulcastEncoderAdapter which works
when there's only a single encoder.
BUG=webrtc:5060
R=stefan@webrtc.org
Review URL: https://codereview.webrtc.org/1397653004
Cr-Commit-Position: refs/heads/master@{#10291}
Reason for revert:
Temporarily reverting as this causes some issues with perf tests. Especially tests with packet loss no longer works.
Original issue's description:
> Adding support for simulcast and spatial layers into VideoQualityTest
>
> The CL includes several changes:
> - Adding flags describing the streams and spatial layers.
> - Reorganizing the order of the flags, to make them easier to maintain.
> - Adding a member .params_ to VideoQualityAnalyzer.
> (instead of passing it to every member function manually)
> - Updating VideoAnalyzer to support simulcast.
> (select appropriate ssrc and fix timestamps which are sometimes increased by 1)
> - VP9EncoderImpl already had code for automatic calculation of bitrate for each layer.
> Changing to first read bitrates and resolution ratios from the flags, if specified.
> If not specified, reverting to the old code are setting the values automatically.
> - Changing the parameters in LayerFilteringTransport, replacing
> xx_discard_thresholds with selected_xx, to make it easier to use for the end user.
>
> Committed: https://crrev.com/87f83a9a27d657731ccb54025bc04ccad0da136e
> Cr-Commit-Position: refs/heads/master@{#10215}
TBR=pbos@webrtc.org,mflodman@webrtc.org,ivica@webrtc.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.webrtc.org/1397363002
Cr-Commit-Position: refs/heads/master@{#10252}
The CL includes several changes:
- Adding flags describing the streams and spatial layers.
- Reorganizing the order of the flags, to make them easier to maintain.
- Adding a member .params_ to VideoQualityAnalyzer.
(instead of passing it to every member function manually)
- Updating VideoAnalyzer to support simulcast.
(select appropriate ssrc and fix timestamps which are sometimes increased by 1)
- VP9EncoderImpl already had code for automatic calculation of bitrate for each layer.
Changing to first read bitrates and resolution ratios from the flags, if specified.
If not specified, reverting to the old code are setting the values automatically.
- Changing the parameters in LayerFilteringTransport, replacing
xx_discard_thresholds with selected_xx, to make it easier to use for the end user.
Review URL: https://codereview.webrtc.org/1353263005
Cr-Commit-Position: refs/heads/master@{#10215}
Since padding is no longer sent on Encoded() callbacks, dummy callbacks
aren't required to generate padding. This skip-frame behavior can then
be removed to get rid of dummy callbacks though nothing was encoded. As
frames don't have to be generated for frames that don't have to be sent
we skip encoding frames that aren't intended to be sent either, reducing
CPU load.
BUG=
R=mflodman@webrtc.org, stefan@webrtc.org
Review URL: https://codereview.webrtc.org/1369923005 .
Cr-Commit-Position: refs/heads/master@{#10181}
This CL changes the threshold where we consider a block to be static and
of sufficient quality to not spend bits/CPU encoding it.
Perf note: This change may result in a minor degradation of PSNR/SSIM
and available send bitrate. CPU usage and bitrate sent should however
be greately reduced.
BUG=webrtc:5015
Review URL: https://codereview.webrtc.org/1383533002
Cr-Commit-Position: refs/heads/master@{#10134}
Our perf test suite webrtc_perf_tests timed out, which caused most
of the delay landing this (https://crbug.comn/535973 and
https://codereview.chromium.org/1370133004).
Other problems with executing Android tests also needed to be
resolved in order to land this (http://crbug.com/534849).
Libvpx has moved from third_party/libvpx to third_party/libvpx_new
as of https://codereview.chromium.org/1323333002/
Android GN was blocking this roll due to a problem that ended up
being caused by a bug (http://crbug.com/534849).
Relevant changes:
* src/buildtools: f7310ee..8d89c1b
* src/third_party/boringssl/src: 1d128f3..4c60d35
* src/third_party/icu: 6b3ce81..423fc7e
* src/third_party/libjpeg_turbo: 631e2dd..e4e7503
* src/third_party/libvpx: ac1772e..70db223
* src/third_party/libyuv: fcacbfb..62c49dc
* src/tools/gyp: 5d01a8c..01528c7
* src/tools/swarming_client: 77f720b..6e5d2b2
Details: 310ea93..8cf53d6/DEPS
Clang version changed 245965:247874
Details: 310ea93..8cf53d6/tools/clang/scripts/update.sh
BUG=481034, 535973
TBR=marpan@webrtc.org
Review URL: https://codereview.webrtc.org/1355083002
Cr-Commit-Position: refs/heads/master@{#10101}
Android hardware H.264 seems to keep a steady high-QP flow instead of
dropping frames, so framedrops aren't sufficient to detect a bad state
where downscaling would be beneficial.
BUG=webrtc:4968
R=magjed@webrtc.org, stefan@webrtc.org
Review URL: https://codereview.webrtc.org/1364253002 .
Cr-Commit-Position: refs/heads/master@{#10078}
