- Renamed variables and some function to comply with style guide.
- Removed default argument values.
- Removed some dead code.
- Cleaned up comments formatting in rtp_rtcp.h
R=danilchap@webrtc.org, stefan@webrtc.org
Review URL: https://codereview.webrtc.org/2067673004 .
Cr-Commit-Position: refs/heads/master@{#13565}
This is an issue if the sequence numbers are to be used to compute packet loss statistics since it introduces gaps which are not related to loss.
Also making sure that the header extensions are properly guarded by the send crit sect.
Review-Url: https://codereview.webrtc.org/2190913002
Cr-Commit-Position: refs/heads/master@{#13557}
Reason for revert:
Breaks upstream code.
Original issue's description:
> Refactor NACK bitrate allocation
>
> Nack bitrate allocation should not be done on a per-rtp-module basis,
> but rather shared bitrate pool per call. This CL moves allocation to the
> pacer and cleans up a bunch if bitrate stats handling.
>
> BUG=
> R=danilchap@webrtc.org, stefan@webrtc.org, tommi@webrtc.org
>
> Committed: 5fc59e810bTBR=tommi@webrtc.org,danilchap@webrtc.org,stefan@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review-Url: https://codereview.webrtc.org/2131913003
Cr-Commit-Position: refs/heads/master@{#13417}
This CL adds support for an extension on RTP frames to allow the sender
to specify the minimum and maximum playout delay limits.
The receiver makes a best-effort attempt to keep the capture-to-render delay
within this range. This allows different types of application to specify
different end-to-end delay goals. For example gaming can support rendering
of frames as soon as received on receiver to minimize delay. A movie playback
application can specify a minimum playout delay to allow fixed buffering
in presence of network jitter.
There are no tests at this time and most of testing is done with chromium
webrtc prototype.
On chromoting performance tests, this extension helps bring down end-to-end
delay by about 150 ms on small frames.
BUG=webrtc:5895
Review-Url: https://codereview.webrtc.org/2007743003
Cr-Commit-Position: refs/heads/master@{#13059}
- "WebRTC.Video.SendDelayInMs"
Change so that PacketOption packet id is always set in RtpSender (if having a TransportSequenceNumberAllocator).
Add SendDelayStats class for computing delays.
Add SendPacketObserver to RtpRtcp config and register SendDelayStats as observer.
Wire up OnSentPacket to SendDelayStats.
BUG=webrtc:5215
Review-Url: https://codereview.webrtc.org/1478253002
Cr-Commit-Position: refs/heads/master@{#12600}
Class contained a lot of not-really-wired-up functionality that ended up
being complicated ways of saying return 1; or return false;. This
removes this dependency that complicates code readability significantly.
BUG=webrtc:5066
R=marpan@google.com, marpan@webrtc.orgTBR=stefan@webrtc.org
Review URL: https://codereview.webrtc.org/1917083003 .
Cr-Commit-Position: refs/heads/master@{#12516}
Adds logging to RTPSender and RTCPSender, pushing an event log pointer from Channel through ModuleRtpRtcpImpl to the Sender objects.
BUG=webrtc:4741
Review URL: https://codereview.webrtc.org/1571283002
Cr-Commit-Position: refs/heads/master@{#11336}
The current expectation for InsertPacket(...) uses WillRepeatedly, which accepts if the function is called zero or more times. This CL changes this to either a fixed number of calls, or at least a positive number of calls.
Review URL: https://codereview.webrtc.org/1585783003
Cr-Commit-Position: refs/heads/master@{#11256}
rtcp_utility, rtp_utility, tmmbr_help, rtcp_receiver, rtcp_receiver_help are explicetly excluded from the cleanup becaues there are short plans (or cls) to do a deeper cleaning there.
BUG=webrtc:5277
R=pbos@webrtc.org, mflodman@webrtc.org
Review URL: https://codereview.webrtc.org/1512493002
Cr-Commit-Position: refs/heads/master@{#10966}
This changes the following module directories:
* webrtc/modules/audio_conference_mixer/interface
* webrtc/modules/interface
* webrtc/modules/media_file/interface
* webrtc/modules/rtp_rtcp/interface
* webrtc/modules/utility/interface
To avoid breaking downstream, I followed this recipe:
1. Copy the interface dir to a new sibling directory: include
2. Update the header guards in the include directory to match the style guide.
3. Update the header guards in the interface directory to match the ones in include. This is required to avoid getting redefinitions in the not-yet-updated downstream code.
4. Add a pragma warning in the header files in the interface dir. Example:
#pragma message("WARNING: webrtc/modules/interface is DEPRECATED; "
"use webrtc/modules/include")
5. Search for all source references to webrtc/modules/interface and update them to webrtc/modules/include (*.c*,*.h,*.mm,*.S)
6. Update all GYP+GN files. This required manual inspection since many subdirectories of webrtc/modules referenced the interface dir using ../interface etc(*.gyp*,*.gn*)
BUG=5095
TESTED=Passing compile-trybots with --clobber flag:
git cl try --clobber --bot=win_compile_rel --bot=linux_compile_rel --bot=android_compile_rel --bot=mac_compile_rel --bot=ios_rel -m tryserver.webrtc
R=stefan@webrtc.org, tommi@webrtc.org
Review URL: https://codereview.webrtc.org/1417683006 .
Cr-Commit-Position: refs/heads/master@{#10500}
Since the pacer is always enabled, removing enable/disable which makes
all packet queueing succeed. Also renaming one of the ::SendPackets
::InsertPacket to avoid confusion.
BUG=webrtc:1695, webrtc:2629
R=stefan@webrtc.org
Review URL: https://codereview.webrtc.org/1392513002 .
Cr-Commit-Position: refs/heads/master@{#10211}
This allows us to pass packet meta data, such as transport sequence
number, to libjingle and further down to the socket implementation. A
similar struct already exist in libjingle, see rtc::PacketOptions in asyncpacketsocket.h.
BUG=4173
Review URL: https://codereview.webrtc.org/1376673004
Cr-Commit-Position: refs/heads/master@{#10144}
To make this possible padding only packets will have the same timestamp
as the previously sent media packet, as long as RTX is not enabled. This
has the side effect that if we send only padding for a long time without
sending media, a receive-side jitter buffer could potentially overflow.
In practice this shouldn't be an issue, partly because RTX is recommended and
used by default, but also because padding typically is terminated before being
received by a client. It is also not an issue for bandwidth estimation as long
as abs-send-time is used instead of toffset.
BUG=chromium:425925
R=mflodman@webrtc.org, sprang@webrtc.org, tommi@webrtc.org
Review URL: https://codereview.webrtc.org/1327933003 .
Cr-Commit-Position: refs/heads/master@{#9984}
Starts by removing channel/engine id from ViEChannel which propagates
down to the RTP/RTCP module as well as the transport class.
IncomingVideoStream::RenderFrame() is untouched for now but receives a
fake id instead of the previous channel id. Added a TODO to remove it
later but the RenderFrame call is implemented in a lot of
platform-dependent files and should probably remove the "manager" aspect
of renderers, so preferring to do it separately
BUG=webrtc:1695
R=henrika@webrtc.org, mflodman@webrtc.org
Review URL: https://codereview.webrtc.org/1335353005 .
Cr-Commit-Position: refs/heads/master@{#9978}
Also refactor packet router to use a map rather than iterate over all
rtp modules for each packet sent.
BUG=webrtc:4311
Review URL: https://codereview.webrtc.org/1247293002
Cr-Commit-Position: refs/heads/master@{#9670}
This CL makes two changes to rtc::Buffer that have had to wait for
Chromium's use of it to be modernized:
1. Change default return type of rtc::Buffer::data() from char* to
uint8_t*. uint8_t is a more natural type for bytes, and won't
accidentally convert to a string. (Chromium previously expected
the default return type to be char, which is why
rtc::Buffer::data() initially got char as default return type in
9478437f, but that's been fixed now.)
2. Stop accepting void* inputs in constructors and methods. While
this is convenient, it's also dangerous since any pointer type
will implicitly convert to void*.
(This was previously committed (9e1a6d7c) but had to be reverted
(cbf09274) because Chromium on Android wasn't quite ready for it).
TBR=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/47109004
Cr-Commit-Position: refs/heads/master@{#9132}
This CL makes two changes to rtc::Buffer that have had to wait for
Chromium's use of it to be modernized:
1. Change default return type of rtc::Buffer::data() from char* to
uint8_t*. uint8_t is a more natural type for bytes, and won't
accidentally convert to a string. (Chromium previously expected
the default return type to be char, which is why
rtc::Buffer::data() initially got char as default return type in
9478437f, but that's been fixed now.)
2. Stop accepting void* inputs in constructors and methods. While
this is convenient, it's also dangerous since any pointer type
will implicitly convert to void*.
R=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/44269004
Cr-Commit-Position: refs/heads/master@{#9121}
This implementation registers RTX-APT map inside RTP sender and receiver.
While it only generates SDP with RTX associated with VP8 to make it
compatible with previous Chrome versions.
Should add following changes after reaches stable,
* Use RTX-APT map for building and restoring RTP packets.
* Add RTX support for RED or VP9 in Video engine.
* Set RTX payload type for RED inside FecConfig in EndToEndTest.
BUG=4024
R=mflodman@webrtc.org, pbos@webrtc.org, pthatcher@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/36889004
Cr-Commit-Position: refs/heads/master@{#9040}
1. Constructors, SetData(), and AppendData() now accept uint8_t*,
int8_t*, and char*. Previously, they accepted void*, meaning that
any kind of pointer was accepted. I think requiring an explicit
cast in cases where the input array isn't already of a byte-sized
type is a better compromise between convenience and safety.
2. data() can now return a uint8_t* instead of a char*, which seems
more appropriate for a byte array, and is harder to mix up with
zero-terminated C strings. data<int8_t>() is also available so
that callers that want that type instead won't have to cast, as
is data<char>() (which remains the default until all existing
callers have been fixed).
3. Constructors, SetData(), and AppendData() now accept arrays
natively, not just decayed to pointers. The advantage of this is
that callers don't have to pass the size separately.
4. There are new constructors that allow setting size and capacity
without initializing the array. Previously, this had to be done
separately after construction.
5. Instead of TransferTo(), Buffer now supports swap(), and move
construction and assignment, and has a Pass() method that works
just like std::move(). (The Pass method is modeled after
scoped_ptr::Pass().)
R=jmarusic@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/42989004
Cr-Commit-Position: refs/heads/master@{#9033}
