If a very large frame is sent (high res slide change) when the available
send bitrate is very low, the it might take many seconds before any new
frames are emitted as the accrued debt will take time to pay off.
Add a bailout, so that if a frame hasn't been sent for 2 seconds, cancel
the debt immediately, even if the target bitrate is then exceeded.
BUG=webrtc:5750
Review URL: https://codereview.webrtc.org/1869003002
Cr-Commit-Position: refs/heads/master@{#12328}
- First audio RTP packet sent / received
- First RTP packet of the first video frame sent / received
- Last RTP packet of the first video frame sent / received
These timestamps should make it easier to measure how fast the call
becomes established from the user's perspective.
Review URL: https://codereview.webrtc.org/1765443002
Cr-Commit-Position: refs/heads/master@{#12287}
- Makes vt h264 decoder output CoreVideoFrameBuffer
- Makes iOS renderer convert frame buffer if it is not i420
BUG=
Review URL: https://codereview.webrtc.org/1853503003
Cr-Commit-Position: refs/heads/master@{#12224}
Permits going from HD to QVGA in 6 seconds instead of 10. Also adds
windows for going up quickly in the beginning of a call (before any
downscaling happens due to bad quality).
BUG=webrtc:5678
R=glaznev@webrtc.org, stefan@webrtc.org
Review URL: https://codereview.webrtc.org/1830593003 .
Cr-Commit-Position: refs/heads/master@{#12219}
Removes "SimulcastEncoderAdapter" from single-stream HW VP8 even though
they are wrapped in a SimulcastEncoderAdapter.
BUG=
R=stefan@webrtc.org
Review URL: https://codereview.webrtc.org/1827553002 .
Cr-Commit-Position: refs/heads/master@{#12161}
Adds logging of:
- video stats that are recorded when a stream is removed
- bitrate stats that are recorded at the end of a call
- initial bwe rampup stats
BUG=
Review URL: https://codereview.webrtc.org/1788783002
Cr-Commit-Position: refs/heads/master@{#12133}
This CL is expected to lower goog_max_decode_ms and total_delay_incl_network/receiver_time for screenshare.
Reason for revert:
This CL did not cause the unexpected goog_encode_usage_percent and goog_avg_encode_ms perf changes.
Original issue's description:
> Revert of VCMCodecTimer: Change filter from max to 95th percentile (patchset #5 id:180001 of https://codereview.webrtc.org/1742323002/ )
>
> Reason for revert:
> Caused unexpected perf stats changes, see http://crbug/594575.
>
> Original issue's description:
> > VCMCodecTimer: Change filter from max to 95th percentile
> >
> > The purpose with this change is to make the filter more robust against anomalies. googMaxDecodeMs is expected to drop a litte by this.
> >
> > BUG=b/27306053
> >
> > Committed: https://crrev.com/4bf0c717740d1834e810ea5f32b3c4306c64235f
> > Cr-Commit-Position: refs/heads/master@{#11952}
>
> TBR=stefan@webrtc.org,philipel@webrtc.org
> # Not skipping CQ checks because original CL landed more than 1 days ago.
> BUG=594575,b/27306053
>
> Committed: https://crrev.com/c4a74e95b545f4752d4e72961ac03c1380d4bc1f
> Cr-Commit-Position: refs/heads/master@{#12018}
TBR=stefan@webrtc.org,philipel@webrtc.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=594575,b/27306053
Review URL: https://codereview.webrtc.org/1824763003
Cr-Commit-Position: refs/heads/master@{#12087}
Except in places where this would break out-of-tree code,
such as Chromium.
BUG=webrtc:5520
Review URL: https://codereview.webrtc.org/1785173002
Cr-Commit-Position: refs/heads/master@{#12037}
Reason for revert:
Caused unexpected perf stats changes, see http://crbug/594575.
Original issue's description:
> VCMCodecTimer: Change filter from max to 95th percentile
>
> The purpose with this change is to make the filter more robust against anomalies. googMaxDecodeMs is expected to drop a litte by this.
>
> BUG=b/27306053
>
> Committed: https://crrev.com/4bf0c717740d1834e810ea5f32b3c4306c64235f
> Cr-Commit-Position: refs/heads/master@{#11952}
TBR=stefan@webrtc.org,philipel@webrtc.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=594575,b/27306053
Review URL: https://codereview.webrtc.org/1808693002
Cr-Commit-Position: refs/heads/master@{#12018}
Reason for revert:
The openmax_dl include change breaks downstream projects.
Original issue's description:
> Add check_deps rules in DEPS files.
>
> Add fine-grained check_deps rules for all of WebRTC.
> This will help both maintaining sane dependencies and provides a way
> to visualize dependency graphs using the buildtools/checkdeps/graphdeps.py script.
>
> Example:
> buildtools/checkdeps/graphdeps.py --root=. --format=png \
> --out=./webrtc.png --incl='^webrtc/modules/bitrate_controller->' \
> --excl='chromium|base|external|testing|webrtc/test|\.h$|\.cc$'
>
> will produce a neat webrtc.png image showcasing the dependencies
> (according to the DEPS file) for the bitrate_controller module.
> Some dependencies are filtered out for readability.
>
> BUG=webrtc:5623
> TESTED=Passing runs using:
> buildtools/checkdeps/checkdeps.py --root=. talk
> buildtools/checkdeps/checkdeps.py --root=. webrtc
>
> R=tommi@webrtc.org
>
> Committed: https://crrev.com/086f851b7b9b4bcbd4fe507c3bf83b760bd7f4d9
> Cr-Commit-Position: refs/heads/master@{#12008}
TBR=tommi@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:5623
Review URL: https://codereview.webrtc.org/1808573002
Cr-Commit-Position: refs/heads/master@{#12009}
Add fine-grained check_deps rules for all of WebRTC.
This will help both maintaining sane dependencies and provides a way
to visualize dependency graphs using the buildtools/checkdeps/graphdeps.py script.
Example:
buildtools/checkdeps/graphdeps.py --root=. --format=png \
--out=./webrtc.png --incl='^webrtc/modules/bitrate_controller->' \
--excl='chromium|base|external|testing|webrtc/test|\.h$|\.cc$'
will produce a neat webrtc.png image showcasing the dependencies
(according to the DEPS file) for the bitrate_controller module.
Some dependencies are filtered out for readability.
BUG=webrtc:5623
TESTED=Passing runs using:
buildtools/checkdeps/checkdeps.py --root=. talk
buildtools/checkdeps/checkdeps.py --root=. webrtc
R=tommi@webrtc.org
Review URL: https://codereview.webrtc.org/1796413002 .
Cr-Commit-Position: refs/heads/master@{#12008}
Testing the nack module by implementing it into the current jitter buffer
under the experiment WebRTC-NewVideoJitterBuffer.
BUG=webrtc:5514
Review URL: https://codereview.webrtc.org/1778503002
Cr-Commit-Position: refs/heads/master@{#11969}
The purpose with this change is to make the filter more robust against anomalies. googMaxDecodeMs is expected to drop a litte by this.
BUG=b/27306053
Review URL: https://codereview.webrtc.org/1742323002
Cr-Commit-Position: refs/heads/master@{#11952}
When the iOS application is not in the foreground, the hardware encoder and
decoder become invalidated. There doesn't seem to be a way to query their state
so we don't know they're invalid until we get an error code after an
encode/decode request. To solve the issue, we just don't encode/decode when the
app is not active, and reinitialize the encoder/decoder when the app is active
again.
Also fixes a leak in the decoder.
BUG=webrtc:4081
Review URL: https://codereview.webrtc.org/1732953003
Cr-Commit-Position: refs/heads/master@{#11916}
Previous logged delay was: network delay (rtt/2) + jitter delay + decode time + render delay.
Make capture time in local timebase available for decoded VP9 video frames (propagate ntp_time_ms from EncodedImage to decoded VideoFrame).
BUG=
Review URL: https://codereview.webrtc.org/1688143003
Cr-Commit-Position: refs/heads/master@{#11901}
1. Fix the case of key frame accumulation being incorrect due to the chunk
size being computed at the time of leak based on input frame rate. The issue
is that the count is computed based on key frame ratio and the actual chunk
size computed from current input frame rate. These can be wildly different
especially at the beginning of the stream (key frame ratio defaults based
on 30 fps) resulting in incorrect key frame accumulation causing large frame
drops when the input frame rate is low.
2. Add large delta frame compensation. The current code accounts for key frames
but not large delta frames. This is a common occurence in some application
(remote desktop as an example)
3. Fixes an issue identified by the unit tests. The accumulation of
key frames had an issue in the scenario of a high key frame ratio where
the full key frame was not being accounted for.
3. Removes fast mode and other methods that are mostly dead code.
4. Cleans up variable names as per chromium style.
Review URL: https://codereview.webrtc.org/1750493002
Cr-Commit-Position: refs/heads/master@{#11884}
Things done/implemented in this CL:
- An interface that can send Nack (VCMNackSender).
- An interface that can request KeyFrames (VCMKeyFrameRequestSender).
- The nack module (NackModule).
- A set of convenience functions for modular numbers (mod_ops.h).
BUG=webrtc:5514
Review URL: https://codereview.webrtc.org/1715673002
Cr-Commit-Position: refs/heads/master@{#11882}
Move the "webrtc_test_common" target to test.gyp and rename
it to "test_common".
Move all tests in "webrtc_test_common_unittests" (which
wasn't run on the bots) into "test_support_unittests".
NOTRY=True
NOPRESUBMIT=True
Review URL: https://codereview.webrtc.org/1754593002
Cr-Commit-Position: refs/heads/master@{#11848}
Reason for revert:
Revert breaks other uses, a fix will be rolled into Chromium instead.
Original issue's description:
> Revert of Remove ignored return code from modules. (patchset #3 id:40001 of https://codereview.webrtc.org/1703833002/ )
>
> Reason for revert:
> Breaks Chromium.
>
> Original issue's description:
> > Remove ignored return code from modules.
> >
> > ModuleProcessImpl doesn't act on return codes and having them around is
> > confusing (it's unclear what an error return code here would do even).
> >
> > BUG=
> > R=tommi@webrtc.org
> >
> > Committed: f14c47a58c
>
> TBR=tommi@webrtc.org,pbos@webrtc.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=
>
> Committed: https://crrev.com/da33a8a2a22f6d19ba2a8cce963beafbdbaa8fd8
> Cr-Commit-Position: refs/heads/master@{#11761}
TBR=tommi@webrtc.org,torbjorng@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.webrtc.org/1737013002
Cr-Commit-Position: refs/heads/master@{#11762}
Reason for revert:
Breaks Chromium.
Original issue's description:
> Remove ignored return code from modules.
>
> ModuleProcessImpl doesn't act on return codes and having them around is
> confusing (it's unclear what an error return code here would do even).
>
> BUG=
> R=tommi@webrtc.org
>
> Committed: f14c47a58cTBR=tommi@webrtc.org,pbos@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.webrtc.org/1736663004
Cr-Commit-Position: refs/heads/master@{#11761}
ModuleProcessImpl doesn't act on return codes and having them around is
confusing (it's unclear what an error return code here would do even).
BUG=
R=tommi@webrtc.org
Review URL: https://codereview.webrtc.org/1703833002 .
Cr-Commit-Position: refs/heads/master@{#11747}
initialization and errors.
The stats are counts using enumeration, an instance of
H264EncoderImpl/H264DecoderImpl will report at most 1 Init
and 1 Error for its entire lifetime. This is to avoid
spamming reports if initialization or coding fails and it
retries in a loop. The Init stats will give us an idea of
usage counts for the encoder/decoder. The Error stats will
give us an idea of how many of these usages encounters some
type of problem, such as encode or decode errors.
- WebRTC.Video.H264EncoderImpl.Event:
* kH264EncoderEventInit: Occurs at InitEncode.
* kH264EncoderEventError: Occurs if any type of error
occurs during initialization or encoding.
- WebRTC.Video.H264DecoderImpl.Event:
* kH264DecoderEventInit: Occurs at InitDecode.
* kH264DecoderEventError: Occurs if any type of error
occurs during initialization, AVGetBuffer2 or decoding.
Chromium sibling CL:
https://codereview.chromium.org/1719273002/
BUG=chromium:500605, chromium:468365
Review URL: https://codereview.webrtc.org/1716173002
Cr-Commit-Position: refs/heads/master@{#11736}
The legacy objc API is not included in the GYP generation if include_tests=0.
This causes problems downstream in some cases, so it's changed in this CL.
The libyuv dependency needs to be possible to disable using the build_libyuv
GYP variable.
NOTRY=True
Review URL: https://codereview.webrtc.org/1705733002
Cr-Commit-Position: refs/heads/master@{#11652}
With this change the following tests have been successfully
passing in the iOS Simulator for iPhone 5 and iOS 9:
* audio_decoder_unittests
* common_video_unittests
* modules_tests
* rtc_api_objc_tests
* rtc_pc_unittests
* system_wrappers_unittests
* voice_engine_unittests
The modules_unittests and common_audio_unittests are
handled in https://codereview.webrtc.org/1698033002/
BUG=webrtc:4755
NOTRY=True
Review URL: https://codereview.webrtc.org/1694353003
Cr-Commit-Position: refs/heads/master@{#11646}
Until the bug has been further investigated, we're limiting the number
of threads to 1 to avoid problems. See crbug.com/583348.
BUG=chromium:500605, chromium:468365, chromium:583348
Review URL: https://codereview.webrtc.org/1677543002
Cr-Commit-Position: refs/heads/master@{#11536}
There were a couple of GN and GYP references that were incorrect in Chromium builds:
- GN references between WebRTC targets must be using relative paths, not absolute.
- GYP references between WebRTC targets must be using the <(webrtc_root)v variable
in order to be expanded to the correct path in a Chromium build.
NOTRY=True
TBR=hjon@webrtc.org, hbos@webrtc.org
Review URL: https://codereview.webrtc.org/1681493002
Cr-Commit-Position: refs/heads/master@{#11521}
Extracts shared members outside the two objects, removing PayloadRouter
from receivers and the VCM for ViEChannel from senders.
Removes Start/StopThreadsAndSetSharedMembers that was used to set the
shared state between them.
Also adding DCHECKs to document what's only used by the
sender/receiver side.
BUG=webrtc:5494
R=stefan@webrtc.org
Review URL: https://codereview.webrtc.org/1654913002 .
Cr-Commit-Position: refs/heads/master@{#11500}
