Use the current parameter names in the comment for SetNackMode().
Add a warning comment about the lifetime of the return value of
GetNackList().
R=stefan@webrtc.org
BUG=none
TEST=none
Review URL: https://webrtc-codereview.appspot.com/52599004
Cr-Commit-Position: refs/heads/master@{#9321}
The most important change is to prevent a potential buffer overflow in
NackList(). It cannot happen if the |size| argument passed to NackList()
is consistent with the |max_nack_list_size| argument passed to
SetNackSettings(), and there is an assertion to check that. But it is
good to defend against this in the release build because assert() is
compiled away in the release build.
Remove the unused |master| parameter to the VCMReceiver constructor.
Remove the unused State() getter method and the corresponding state_
member.
Remove the declarations for the nonexistent GenerateReceiverId()
method and the receiver_id_counter_ member.
Remove the unneeded data_buffer_ member of TestVCMReceiver. It was
assigned to packet.dataPtr and then immediately overwritten by
stream_generator_->GetPacket() or stream_generator_->PopPacket().
R=stefan@webrtc.org
BUG=none
TEST=none
Review URL: https://webrtc-codereview.appspot.com/51119004
Cr-Commit-Position: refs/heads/master@{#9318}
uint32_t parameters don't need to be passed by reference. The
VCMJitterBuffer destructor doesn't need to be virtual because the
class has no virtual methods.
R=stefan@webrtc.org
BUG=none
Review URL: https://webrtc-codereview.appspot.com/55499004
Cr-Commit-Position: refs/heads/master@{#9288}
Add pylintrc file based on
https://code.google.com/p/chromium/codesearch#chromium/src/tools/perf/pylintrc
bit tightened up quite a bit (the one in depot_tools is far
more relaxed).
Remove a few excluded directories from pylint check and fixed/
suppressed all warnings generated.
Add GN format check + formatted all GN files using 'gn format'.
Cleanup redundant rules in tools/PRESUBMIT.py
TESTED=Ran 'git cl presubmit -vv', fixed the PyLint violations.
Ran it again with a modification in webrtc/build/webrtc.gni, formatted
all the GN files and ran it again.
R=henrika@webrtc.org, phoglund@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/50069004
Cr-Commit-Position: refs/heads/master@{#9274}
tl;dr - non-continuous frames (due to padding) would get stuck as incomplete if the previous complete frame arrived and was decoded before the padding arrived.This fix re-checks the incomplete frame list for continuous frames after old packets arrive.
When padding is enabled and RTX is not, padding is sent as empty RTP packets tacked onto the end of completed frames (meaning: same timestamp, but after a packet with the marker bit set). Given the following set of circumstances, codified in the new unit test method, a frame can get permanently stuck in the incomplete frames list:
- Frame A decoded (packets 94-95). Next expected sequence number is 96.
- Frame C arrives (packets 100-101) and is marked complete. It isn't continuous, since it starts at 100, so it's placed in the incomplete frame list.
- Frame B arrives (packets 96-97) and is complete, since 97 has a marker bit. Turns out that packets 98-99 are padding, but the receiver doesn't know that.
- Frame B is decoded, removed from the decodable frames list, and last decoded state is updated.
- Packets 98-99 arrive. They hit the IsOldPacket check and update the last decoded state, but they don't trigger FindAndInsertContinuousFrames.
- Further packets/frames arrive and complete, but FindAndInsertContinuousFrames only runs on frames that are newer than the newly completed frame.
In this state, Frame C is permanently stuck as incomplete, so the jitter buffer overall is stuck until max NACK age (default: 450 packets), the max NACK list size (default: 200 packets), or a keyframe arrives and IsContinuous returns true for the keyframe.
(Before the November refactoring, Frame B wouldn't have to have been decoded for the bug to trigger; just having a complete continuous frame at any time before the padding arrived would cause this state, as FindAndInsertContinuousFrames was only called when the frame originally became continuous and was inserted into the decodable frames list. Post refactoring, the frame is removed/re-added to the decodable list on every padding packet that arrives)
BUG=
R=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/50959004
Cr-Commit-Position: refs/heads/master@{#9264}
ViEChannels without default encoders doesn't register a receive codec by
default. This makes VideoReceiver::Decode return early, causing a
high-priority thread to effectively be busy looping. This would be
expected to wreck more havoc in a more cross-platform manner than it has
visibly done. On Windows XP however it manages to bring the whole
machine to a grinding halt forcing a reboot if CPU usage hits 100%.
BUG=chromium:470013
R=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/48049004
Cr-Commit-Position: refs/heads/master@{#8976}
It is just a pass through to webrtc/video_frame.h. Updated the callers
to include webrtc/video_frame.h instead and removed i420_video_frame.h.
This should fix pbos' TODO in i420_video_frame.h.
Tested on Linux with the following command lines:
$ rm -rf out/
$ ./webrtc/build/gyp_webrtc
$ ninja -C out/Debug
BUG=None
TEST=see above
R=magjed@webrtc.org, pbos@webrtc.org, tommi@webrtc.orgTBR=tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/46819004
Patch from Thiago Farina <tfarina@chromium.org>.
Cr-Commit-Position: refs/heads/master@{#8973}
CopyCodecSpecific nulls out the rtpheader pointer hence causing the crash downstream.
More details about the codec type enums:
There are 2 enums defined. webrtc::VideoCodecType webrtc::RtpCodecTypes and they don't match. Inside CopyCodecSpecific in generic_encoder.cc, it was converted from the first to the 2nd type. At that point, it'll be kRtpVideoNone (as the effect of memset to 0). kRtpVideoNone is a bad value as it could cause assert. Later, it'll be reset to kRtpVideoGeneric in RTPSender::SendOutgoingData so it's not a concern.
BUG=4511
R=pbos@webrtc.org, pthatcher@webrtc.org, stefan@webrtc.org
Committed: https://crrev.com/29b1a1c0c7c6f4b1ae4d63844b1dfaa7a72530a0
Cr-Commit-Position: refs/heads/master@{#8951}
Review URL: https://webrtc-codereview.appspot.com/47999004
Cr-Commit-Position: refs/heads/master@{#8955}
CopyCodecSpecific nulls out the rtpheader pointer hence causing the crash downstream.
More details about the codec type enums:
There are 2 enums defined. webrtc::VideoCodecType webrtc::RtpCodecTypes and they don't match. Inside CopyCodecSpecific in generic_encoder.cc, it was converted from the first to the 2nd type. At that point, it'll be kRtpVideoNone (as the effect of memset to 0). kRtpVideoNone is a bad value as it could cause assert. Later, it'll be reset to kRtpVideoGeneric in RTPSender::SendOutgoingData so it's not a concern.
BUG=4511
R=pbos@webrtc.org, pthatcher@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/47999004
Cr-Commit-Position: refs/heads/master@{#8951}
All RTP packets from sender side will carry the rotation info. (will file a bug to track this) On the receiving side, only packets with marker bit set will be examined.
Tests completed:
1. android standalone to android standalone
2. android standalone to chrome (with and without this change)
3. android on chrome
BUG=4145
R=glaznev@webrtc.org, mflodman@webrtc.org, perkj@webrtc.org, pthatcher@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/47399004
Cr-Commit-Position: refs/heads/master@{#8905}
This CL avoids changing the mentioned callbacks during a call, to avoid
a potential deadlock when acquiring _sendCritSect and calling
_mediaOpt.SetTargetRates.
Moving the critsect revealed a race for the FEC parameters in RtpVideoSender, so the CL grew a bit to avoid this. I also cleaned up some code here at the same time, but tried to keep it at a minimum since this CL had already increased a lot in size.
BUG=769
R=pbos@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/42939004
Cr-Commit-Position: refs/heads/master@{#8899}
This means all channels within the same group will share the same pacing queue and scheduler. It also means padding will be computed and sent by a single pacer. To accomplish this I also introduce a PacketRouter which finds the RTP module which owns the packet to be paced out.
BUG=4323
R=mflodman@webrtc.org, pbos@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/45549004
Cr-Commit-Position: refs/heads/master@{#8864}
