All AudioDecoder subclasses have historically lived in NetEq, but they
fit better with the codec they wrap.
BUG=webrtc:4557
Review URL: https://codereview.webrtc.org/1348053002
Cr-Commit-Position: refs/heads/master@{#9961}
The Init() method was previously used to initialize and reset
decoders, and returned an error code. The new Reset() method is used
for reset only; the constructor is now responsible for fully
initializing the AudioDecoder.
Reset() doesn't return an error code; it turned out that none of the
functions it ended up calling could actually fail, so this CL removes
their error return codes as well.
R=henrik.lundin@webrtc.org
Review URL: https://codereview.webrtc.org/1319683002 .
Cr-Commit-Position: refs/heads/master@{#9798}
The only shared state is now the bandwidth estimation info.
This reduces the amount and complexity of the locking
substantially.
Review URL: https://codereview.webrtc.org/1208993010
Cr-Commit-Position: refs/heads/master@{#9762}
These are mostly trivial changes and are separated out just to reduce the
diff on that change to the minimum possible.
Note explanatory comments on patch set 1.
BUG=none
TEST=none
Review URL: https://codereview.webrtc.org/1235643003
Cr-Commit-Position: refs/heads/master@{#9617}
This reverts portions of commit cb180976dd0e9672cde4523d87b5f4857478b5e9, which
reverted commit 83ad33a8aed1fb00e422b6abd33c3e8942821c24. Specifically, the
files in webrtc/modules/audio_coding/neteq/ are relanded.
The original commit message is below:
Upconvert various types to int.
Per comments from HL/kwiberg on https://webrtc-codereview.appspot.com/42569004 , when there is existing usage of mixed types (int16_t, int, etc.), we'd prefer to standardize on larger types like int and phase out use of int16_t.
Specifically, "Using int16 just because we're sure all reasonable values will fit in 16 bits isn't usually meaningful in C."
This converts some existing uses of int16_t (and, in a few cases, other types such as uint16_t) to int (or, in a few places, int32_t). Other locations will be converted to size_t in a separate change.
BUG=none
TBR=kwiberg
Review URL: https://codereview.webrtc.org/1181073002
Cr-Commit-Position: refs/heads/master@{#9427}
Per comments from HL/kwiberg on https://webrtc-codereview.appspot.com/42569004 , when there is existing usage of mixed types (int16_t, int, etc.), we'd prefer to standardize on larger types like int and phase out use of int16_t.
Specifically, "Using int16 just because we're sure all reasonable values will fit in 16 bits isn't usually meaningful in C."
This converts some existing uses of int16_t (and, in a few cases, other types such as uint16_t) to int (or, in a few places, int32_t). Other locations will be converted to size_t in a separate change.
BUG=none
R=andrew@webrtc.org, kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/54629004
Cr-Commit-Position: refs/heads/master@{#9405}
NetEQ can crash when decoder gives too many output samples than it can handle. A practical case this happens is when multiple opus packets are combined.
The best solution is to pass the max size to the ACM decode function and let it return a failure if the max size if too small.
BUG=4361
R=henrik.lundin@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/45619004
Cr-Commit-Position: refs/heads/master@{#8730}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8730 4adac7df-926f-26a2-2b94-8c16560cd09d
This should be safe to land now that issue 4143 was resolved (in r8492).
This change effectively reverts 8488.
TBR=kwiberg@webrtc.org
Original commit message:
This CL changes the way the decoder sample rate is set and updated. In
practice, it only concerns the iSAC (float) codec.
One single iSAC decoder instance is used for both wideband and
super-wideband decoding, and the instance must be told to switch
output frequency if the payload type changes. This used to be done
through a call to UpdateDecoderSampleRate, but is now instead done in
the Decode call as an extra parameter.
Review URL: https://webrtc-codereview.appspot.com/39289004
Cr-Commit-Position: refs/heads/master@{#8496}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8496 4adac7df-926f-26a2-2b94-8c16560cd09d
This CL changes the way the decoder sample rate is set and updated. In
practice, it only concerns the iSAC (float) codec.
One single iSAC decoder instance is used for both wideband and
super-wideband decoding, and the instance must be told to switch
output frequency if the payload type changes. This used to be done
through a call to UpdateDecoderSampleRate, but is now instead done in
the Decode call as an extra parameter.
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/34349004
Cr-Commit-Position: refs/heads/master@{#8476}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8476 4adac7df-926f-26a2-2b94-8c16560cd09d
The subclasses that need a state pointer should declare them---with
the right type, not void*, to get rid of all those casts.
Two small but not quite trivial cleanups are included because they
blocked the state_ removal:
- AudioDecoderG722Stereo now inherits directly from AudioDecoder
instead of being a subclass of AudioDecoderG722.
- AudioDecoder now has a CngDecoderInstance member function, which
is implemented only by AudioDecoderCng. This replaces the previous
practice of calling AudioDecoder::state() and casting the result
to a CNG_dec_inst*. It still isn't pretty, but now the blemish is
plainly visible in the AudioDecoder class declaration.
R=henrik.lundin@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/24169005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7644 4adac7df-926f-26a2-2b94-8c16560cd09d
Breaks Chrome compile:
e:\b\build\slave\win_builder\build\src\third_party\webrtc\modules\audio_coding\neteq\neteq_impl.cc(131) : error C3867: 'webrtc::NetEqImpl::InsertPacketInternal': function call missing argument list; use '&webrtc::NetEqImpl::InsertPacketInternal' to create a pointer to member
e:\b\build\slave\win_builder\build\src\third_party\webrtc\modules\audio_coding\neteq\neteq_impl.cc(131) : error C3861: 'LOG_FERR1': identifier not found
e:\b\build\slave\win_builder\build\src\third_party\webrtc\modules\audio_coding\neteq\neteq_impl.cc(152) : error C3867: 'webrtc::NetEqImpl::InsertPacketInternal': function call missing argument list; use '&webrtc::NetEqImpl::InsertPacketInternal' to create a pointer to member
e:\b\build\slave\win_builder\build\src\third_party\webrtc\modules\audio_coding\neteq\neteq_impl.cc(152) : error C3861: 'LOG_FERR1': identifier not found
e:\b\build\slave\win_builder\build\src\third_party\webrtc\modules\audio_coding\neteq\neteq_impl.cc(169) : error C3867: 'webrtc::NetEqImpl::GetAudioInternal': function call missing argument list; use '&webrtc::NetEqImpl::GetAudioInternal' to create a pointer to member
...
> Remove the state_ member from AudioDecoder
>
> The subclasses that need a state pointer should declare them---with
> the right type, not void*, to get rid of all those casts.
>
> Two small but not quite trivial cleanups are included because they
> blocked the state_ removal:
>
> - AudioDecoderG722Stereo now inherits directly from AudioDecoder
> instead of being a subclass of AudioDecoderG722.
>
> - AudioDecoder now has a CngDecoderInstance member function, which
> is implemented only by AudioDecoderCng. This replaces the previous
> practice of calling AudioDecoder::state() and casting the result
> to a CNG_dec_inst*. It still isn't pretty, but now the blemish is
> plainly visible in the AudioDecoder class declaration.
>
> R=henrik.lundin@webrtc.org
>
> Review URL: https://webrtc-codereview.appspot.com/24169005TBR=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/30879005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7629 4adac7df-926f-26a2-2b94-8c16560cd09d
The subclasses that need a state pointer should declare them---with
the right type, not void*, to get rid of all those casts.
Two small but not quite trivial cleanups are included because they
blocked the state_ removal:
- AudioDecoderG722Stereo now inherits directly from AudioDecoder
instead of being a subclass of AudioDecoderG722.
- AudioDecoder now has a CngDecoderInstance member function, which
is implemented only by AudioDecoderCng. This replaces the previous
practice of calling AudioDecoder::state() and casting the result
to a CNG_dec_inst*. It still isn't pretty, but now the blemish is
plainly visible in the AudioDecoder class declaration.
R=henrik.lundin@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/24169005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@7623 4adac7df-926f-26a2-2b94-8c16560cd09d
