In mow, primary key cache have a big impact on load performance, so we add a new cache type to seperate
it from page cache to make it more flexible in some cases
Arena can replace MemPool in most scenarios. Except for memory reuse, MemPool supports reuse of previous memory chunks after clear, but Arena does not.
Some comparisons between MemPool and Arena:
1. Expansion
Arena is less than 128M index 2 alloc chunk; more than 128M memory, allocate 128M * n > `size`, n is equal to the minimum value that satisfies the expression;
MemPool less than 512K index 2 alloc chunk, greater than 512K memory, separately apply for a `size` length chunk
After Arena applied for a chunk larger than 128M last time, the minimum chunk applied for after that is 128M. Does this seem to be a waste of memory? MemPool is also similar. After the chunk of 512K was applied for last time, the minimum chunk of subsequent applications is 512K.
2. Alignment
MemPool defaults to 16 alignment, because memtable and other places that use int128 require 16 alignment;
Arena has no default alignment;
3. Memory reuse
Arena only supports `rollback`, which reuses the memory of the current chunk, usually the memory requested last time.
MemPool supports clear(), all chunks can be reused; or call ReturnPartialAllocation() to roll back the last requested memory; if the last chunk has no memory, search for the most free chunk for allocation
4. Realloc
Arena supports realloc contiguous memory; it also supports realloc contiguous memory from any position at the time of the last allocation. The difference between `alloc_continue` and `realloc` is:
1. Alloc_continue does not need to specify the old size, but the default old size = head->pos - range_start
2. alloc_continue supports expansion from range_start when additional_bytes is between head and pos, which is equivalent to reusing a part of memory, while realloc completely allocates a new memory
MemPool does not support realloc, but supports transferring or absorbing chunks between two MemPools
5. check mem limit
MemPool checks the mem limit, and Arena checks at the Allocator layer.
6. Support for ASAN
Arena does something extra
7. Error handling
MemPool supports returning the error message of application failure directly through `Status`, and Arena throws Exception.
Tests that Arena can consider
1. After the last applied chunk is larger than 128M, the minimum applied chunk is 128M, which seems to waste memory;
2. Support clear, memory multiplexing;
3. Increase the large list, alloc the memory larger than 128M, and the size is equal to `size`, so as to avoid the current chunk not being fully used, which is wasteful.
4. In some cases, it may be possible to allocate backwards to find chunks t
Follow #17586.
This PR mainly changes:
Remove env/
Remove FileUtils/FilesystemUtils
Some methods are moved to LocalFileSystem
Remove olap/file_cache
Add s3 client cache for s3 file system
In my test, the time of open s3 file can be reduced significantly
Fix cold/hot separation bug for s3 fs.
This is the last PR of #17764.
After this, all IO operation should be in io/fs.
Except for tests in #17586, I also tested some case related to fs io:
clone
concurrency query on local/s3/hdfs
load error log create and clean
disk metrics
This PR supports rowset level data upload on the BE side, so that there can be both cold data and hot data in a tablet,
and there is no necessary to prohibit loading new data to cooled tablets.
Each rowset is bound to a `FileSystem`, so that the storage layer can read and write rowsets without
perceiving the underlying filesystem.
The abstracted `RemoteFileSystem` can try local caching strategies with different granularity,
instead of caching segment files as before.
To avoid conflicts with the code in be/src/io, we temporarily put the file system related code in the be/src/io/fs directory.
In the future, `FileReader`s and `FileWriter`s should be unified.
1. solved the previous delayed unit test file size is too large (1.7G+) and the unit test link time is too long problem problems
2. Unify all unit tests into one file to significantly reduce unit test execution time to less than 3 mins
3. temporarily disable stream_load_test.cpp, metrics_action_test.cpp, load_channel_mgr_test.cpp because it will re-implement part of the code and affect other tests
Early Design Documentation: https://shimo.im/docs/DT6JXDRkdTvdyV3G
Implement a new way of memory statistics based on TCMalloc New/Delete Hook,
MemTracker and TLS, and it is expected that all memory new/delete/malloc/free
of the BE process can be counted.
# Proposed changes
Issue Number: close#6238
Co-authored-by: HappenLee <happenlee@hotmail.com>
Co-authored-by: stdpain <34912776+stdpain@users.noreply.github.com>
Co-authored-by: Zhengguo Yang <yangzhgg@gmail.com>
Co-authored-by: wangbo <506340561@qq.com>
Co-authored-by: emmymiao87 <522274284@qq.com>
Co-authored-by: Pxl <952130278@qq.com>
Co-authored-by: zhangstar333 <87313068+zhangstar333@users.noreply.github.com>
Co-authored-by: thinker <zchw100@qq.com>
Co-authored-by: Zeno Yang <1521564989@qq.com>
Co-authored-by: Wang Shuo <wangshuo128@gmail.com>
Co-authored-by: zhoubintao <35688959+zbtzbtzbt@users.noreply.github.com>
Co-authored-by: Gabriel <gabrielleebuaa@gmail.com>
Co-authored-by: xinghuayu007 <1450306854@qq.com>
Co-authored-by: weizuo93 <weizuo@apache.org>
Co-authored-by: yiguolei <guoleiyi@tencent.com>
Co-authored-by: anneji-dev <85534151+anneji-dev@users.noreply.github.com>
Co-authored-by: awakeljw <993007281@qq.com>
Co-authored-by: taberylyang <95272637+taberylyang@users.noreply.github.com>
Co-authored-by: Cui Kaifeng <48012748+azurenake@users.noreply.github.com>
## Problem Summary:
### 1. Some code from clickhouse
**ClickHouse is an excellent implementation of the vectorized execution engine database,
so here we have referenced and learned a lot from its excellent implementation in terms of
data structure and function implementation.
We are based on ClickHouse v19.16.2.2 and would like to thank the ClickHouse community and developers.**
The following comment has been added to the code from Clickhouse, eg:
// This file is copied from
// https://github.com/ClickHouse/ClickHouse/blob/master/src/Interpreters/AggregationCommon.h
// and modified by Doris
### 2. Support exec node and query:
* vaggregation_node
* vanalytic_eval_node
* vassert_num_rows_node
* vblocking_join_node
* vcross_join_node
* vempty_set_node
* ves_http_scan_node
* vexcept_node
* vexchange_node
* vintersect_node
* vmysql_scan_node
* vodbc_scan_node
* volap_scan_node
* vrepeat_node
* vschema_scan_node
* vselect_node
* vset_operation_node
* vsort_node
* vunion_node
* vhash_join_node
You can run exec engine of SSB/TPCH and 70% TPCDS stand query test set.
### 3. Data Model
Vec Exec Engine Support **Dup/Agg/Unq** table, Support Block Reader Vectorized.
Segment Vec is working in process.
### 4. How to use
1. Set the environment variable `set enable_vectorized_engine = true; `(required)
2. Set the environment variable `set batch_size = 4096; ` (recommended)
### 5. Some diff from origin exec engine
https://github.com/doris-vectorized/doris-vectorized/issues/294
## Checklist(Required)
1. Does it affect the original behavior: (No)
2. Has unit tests been added: (Yes)
3. Has document been added or modified: (No)
4. Does it need to update dependencies: (No)
5. Are there any changes that cannot be rolled back: (Yes)
For the first, we need to make a parameter to discribe the data is local or remote.
At then, we need to support some basic function to support the operation for remote storage.
