When processing the "publish" options of an ALTER PUBLICATION command,
we call SplitIdentifierString() to split the options into a List of
strings. Since SplitIdentifierString() modifies the delimiter
character and puts NULs in their place, this would overwrite the memory
of the AlterPublicationStmt. Later in AlterPublicationOptions(), the
modified AlterPublicationStmt is copied for event triggers, which would
result in the event trigger only seeing the first "publish" option
rather than all options that were specified in the command.
To fix this, make a copy of the string before passing to
SplitIdentifierString().
Here we also adjust a similar case in the pgoutput plugin. There's no
known issues caused by SplitIdentifierString() here, so this is being
done out of paranoia.
Thanks to Henson Choi for putting together an example case showing the
ALTER PUBLICATION issue.
Author: sunil s <sunilfeb26@gmail.com>
Reviewed-by: Henson Choi <assam258@gmail.com>
Reviewed-by: zengman <zengman@halodbtech.com>
Backpatch-through: 14
Prior to v15, GUC settings supplied in the CONNECTION clause of
CREATE SUBSCRIPTION were correctly passed through to
the publisher's walsender. For example:
CREATE SUBSCRIPTION mysub
CONNECTION 'options=''-c wal_sender_timeout=1000'''
PUBLICATION ...
would cause wal_sender_timeout to take effect on the publisher's walsender.
However, commit f3d4019da5d changed the way logical replication
connections are established, forcing the publisher's relevant
GUC settings (datestyle, intervalstyle, extra_float_digits) to
override those provided in the CONNECTION string. As a result,
from v15 through v18, GUC settings in the CONNECTION string were
always ignored.
This regression prevented per-connection tuning of logical replication.
For example, using a shorter timeout for walsender connecting
to a nearby subscriber and a longer one for walsender connecting
to a remote subscriber.
This commit restores the intended behavior by ensuring that
GUC settings in the CONNECTION string are again passed through
and applied by the walsender, allowing per-connection configuration.
Backpatch to v15, where the regression was introduced.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Chao Li <lic@highgo.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://postgr.es/m/CAHGQGwGYV+-abbKwdrM2UHUe-JYOFWmsrs6=QicyJO-j+-Widw@mail.gmail.com
Backpatch-through: 15
Previously the ulimit -p 256 was needed to increase the limit on
openbsd. However, sometimes the limit actually was too low, causing
"could not fork new process for connection: Resource temporarily unavailable"
errors. Most commonly on netbsd, but also on openbsd.
The ulimit on openbsd couldn't trivially be increased with ulimit, because of
hitting the hard limit.
Instead of increasing the limit in the CI script, the CI image generation now
increases the limits: https://github.com/anarazel/pg-vm-images/pull/129
Backpatch-through: 18
This fixes a poorly written integer comparison function which was
performing subtraction in an attempt to return a negative value when
a < b and a positive value when a > b, and 0 when the values were equal.
Unfortunately that didn't always work correctly due to two's complement
having the INT_MIN 1 further from zero than INT_MAX. This could result
in an overflow and cause the comparison function to return an incorrect
result, which would result in the binary search failing to find the
value being searched for.
This could cause poor selectivity estimates when the statistics stored
the value of INT_MAX (2147483647) and the value being searched for was
large enough to result in the binary search doing a comparison with that
INT_MAX value.
Author: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAEoWx2ng1Ot5LoKbVU-Dh---dFTUZWJRH8wv2chBu29fnNDMaQ@mail.gmail.com
Backpatch-through: 14
Commit f54af9f2679d added a check for
io_uring_queue_init_mem(). However, it used the macro name
HAVE_LIBURING_QUEUE_INIT_MEM in both meson.build and the C code, while
the Autotools build script defined HAVE_IO_URING_QUEUE_INIT_MEM. As a
result, the optimization was never enabled in builds configured with
Autotools, as the C code checked for the wrong macro name.
This commit changes the macro name to HAVE_IO_URING_QUEUE_INIT_MEM in
meson.build and the C code. This matches the actual function
name (io_uring_queue_init_mem), following the standard HAVE_<FUNCTION>
convention.
Backpatch to 18, where the macro was introduced.
Bug: #19368
Reported-by: Evan Si <evsi@amazon.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19368-016d79a7f3a1c599@postgresql.org
Backpatch-through: 18
jit_profiling_support=true captures profile data for Linux perf. On
other platforms, LLVMCreatePerfJITEventListener() returns NULL and the
attempt to register the listener would crash.
Fix by ignoring the setting in that case. The documentation already
says that it only has an effect if perf support is present, and we
already did the same for older LLVM versions that lacked support.
No field reports, unsurprisingly for an obscure developer-oriented
setting. Noticed in passing while working on commit 1a28b4b4.
Backpatch-through: 14
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJgB6gvrdDohgwLfCwzVQm%3DVMtb9m0vzQn%3DCwWn-kwG9w%40mail.gmail.com
Previously, ReplicationSlotsComputeRequiredXmin() computed the oldest
xmin across all slots without holding ProcArrayLock (when
already_locked is false), acquiring the lock just before updating the
replication slot xmin.
This could lead to a race condition: if a backend created a new slot
and updates the global replication slot xmin, another backend
concurrently running ReplicationSlotsComputeRequiredXmin() could
overwrite that update with an invalid or stale value. This happens
because the concurrent backend might have computed the aggregate xmin
before the new slot was accounted for, but applied the update after
the new slot had already updated the global value.
In the reported failure, a walsender for an apply worker computed
InvalidTransactionId as the oldest xmin and overwrote a valid
replication slot xmin value computed by a walsender for a tablesync
worker. Consequently, the tablesync worker computed a transaction ID
via GetOldestSafeDecodingTransactionId() effectively without
considering the replication slot xmin. This led to the error "cannot
build an initial slot snapshot as oldest safe xid %u follows
snapshot's xmin %u", which was an assertion failure prior to commit
240e0dbacd3.
To fix this, we acquire ReplicationSlotControlLock in exclusive mode
during slot creation to perform the initial update of the slot
xmin. In ReplicationSlotsComputeRequiredXmin(), we hold
ReplicationSlotControlLock in shared mode until the global slot xmin
is updated in ProcArraySetReplicationSlotXmin(). This prevents
concurrent computations and updates of the global xmin by other
backends during the initial slot xmin update process, while still
permitting concurrent calls to ReplicationSlotsComputeRequiredXmin().
Backpatch to all supported versions.
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Pradeep Kumar <spradeepkumar29@gmail.com>
Reviewed-by: Hayato Kuroda (Fujitsu) <kuroda.hayato@fujitsu.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1L8wYcyTPxNzPGkhuO52WBGoOZbT0A73Le=ZUWYAYmdfw@mail.gmail.com
Backpatch-through: 14
REL_18_STABLE and master have commit ee485912, so they always use the
newer LLVM opaque pointer functions. Drop -Wno-deprecated-declarations
(commit a56e7b660) for code under jit/llvm in those branches, to catch
any new deprecation warnings that arrive in future version of LLVM.
Older branches continued to use functions marked deprecated in LLVM 14
and 15 (ie switched to the newer functions only for LLVM 16+), as a
precaution against unforeseen compatibility problems with bitcode
already shipped. In those branches, the comment about warning
suppression is updated to explain that situation better. In theory we
could suppress warnings only for LLVM 14 and 15 specifically, but that
isn't done here.
Backpatch-through: 14
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1407185.1766682319%40sss.pgh.pa.us
Mkvcbuild.pm scrapes Makefile contents, but couldn't understand the
change made by commit bec2a0aa. Revealed by BF animal hamerkop in
branch REL_16_STABLE.
1. It used += instead of =, which didn't match the pattern that
Mkvcbuild.pm looks for. Drop the +.
2. Mkvcbuild.pm doesn't link PROGRAM executables with libpgport. Apply
a local workaround to REL_16_STABLE only (later branches dropped
Mkvcbuild.pm).
Backpatch-through: 16
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/175163.1766357334%40sss.pgh.pa.us
When looking up statistical data about an expression, we failed to
look through PlaceHolderVar nodes, treating them as opaque. This
could prevent us from matching an expression to base columns, index
expressions, or extended statistics, as examine_variable() relies on
strict structural matching.
As a result, queries involving PlaceHolderVar nodes often fell back to
default selectivity estimates, potentially leading to poor plan
choices.
This patch updates examine_variable() to strip PlaceHolderVars before
analysis. This is safe during estimation because PlaceHolderVars are
transparent for the purpose of statistics lookup: they do not alter
the value distribution of the underlying expression.
To minimize performance overhead on this hot path, a lightweight
walker first checks for the presence of PlaceHolderVars. The more
expensive mutator is invoked only when necessary.
There is one ensuing plan change in the regression tests, which is
expected and demonstrates the fix: the rowcount estimate becomes much
more accurate with this patch.
Back-patch to v18. Although this issue exists before that, changes in
this version made it common enough to notice. Given the lack of field
reports for older versions, I am not back-patching further.
Reported-by: Haowu Ge <gehaowu@bitmoe.com>
Author: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/62af586c-c270-44f3-9c5e-02c81d537e3d.gehaowu@bitmoe.com
Backpatch-through: 18
When pulling up a subquery, we may need to wrap its targetlist items
in PlaceHolderVars to enforce separate identity or as a result of
outer joins. However, this causes any upper-level WHERE clauses
referencing these outputs to contain PlaceHolderVars, which prevents
indxpath.c from recognizing that they could be matched to index
columns or index expressions, potentially affecting the planner's
ability to use indexes.
To fix, explicitly strip PlaceHolderVars from index operands. A
PlaceHolderVar appearing in a relation-scan-level expression is
effectively a no-op. Nevertheless, to play it safe, we strip only
PlaceHolderVars that are not marked nullable.
The stripping is performed recursively to handle cases where
PlaceHolderVars are nested or interleaved with other node types. To
minimize performance impact, we first use a lightweight walker to
check for the presence of strippable PlaceHolderVars. The expensive
mutator is invoked only if a candidate is found, avoiding unnecessary
memory allocation and tree copying in the common case where no
PlaceHolderVars are present.
Back-patch to v18. Although this issue exists before that, changes in
this version made it common enough to notice. Given the lack of field
reports for older versions, I am not back-patching further.
Reported-by: Haowu Ge <gehaowu@bitmoe.com>
Author: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/62af586c-c270-44f3-9c5e-02c81d537e3d.gehaowu@bitmoe.com
Backpatch-through: 18
pg_stat_get_backend_activity() calls pgstat_clip_activity() to ensure
that the reported query string is correctly truncated when it finishes
with an incomplete multi-byte sequence. However, the result returned by
the function was not what pgstat_clip_activity() generated, but the
non-truncated, original, contents from PgBackendStatus.st_activity_raw.
Oversight in 54b6cd589ac2, so backpatch all the way down.
Author: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CAEoWx2mDzwc48q2EK9tSXS6iJMJ35wvxNQnHX+rXjy5VgLvJQw@mail.gmail.com
Backpatch-through: 14
If there are any SRFs in a PathTarget, we must separate it into
SRF-computing and SRF-free targets. This is because the executor can
only handle SRFs that appear at the top level of the targetlist of a
ProjectSet plan node.
If we find a subexpression that matches an expression already computed
in the previous plan level, we should treat it like a Var and should
not split it again. setrefs.c will later replace the expression with
a Var referencing the subplan output.
However, when processing the grouping target for grouping sets, the
planner can fail to recognize that an expression is already computed
in the scan/join phase. The root cause is a mismatch in the
nullingrels bits. Expressions in the grouping target carry the
grouping nulling bit in their nullingrels to indicate that they can be
nulled by the grouping step. However, the corresponding expressions
in the scan/join target do not have these bits.
As a result, the exact match check in list_member() fails, leading the
planner to incorrectly believe that the expression needs to be
re-evaluated from its arguments, which are often not available in the
subplan. This can lead to planner errors such as "variable not found
in subplan target list".
To fix, ignore the grouping nulling bit when checking whether an
expression from the grouping target is available in the pre-grouping
input target. This aligns with the matching logic in setrefs.c.
Backpatch to v18, where this issue was introduced.
Bug: #19353
Reported-by: Marian MULLER REBEYROL <marian.muller@serli.com>
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Discussion: https://postgr.es/m/19353-aaa179bba986a19b@postgresql.org
Backpatch-through: 18
Commit 8a3e4011 introduced tab completion for the ONLY option of
VACUUM and ANALYZE, along with some code simplification using
MatchAnyN. However, it caused a regression in tab completion for
VACUUM option values. For example, neither ON nor OFF was suggested
after "VACUUM (VERBOSE". In addition, the ONLY keyword was not
suggested immediately after a completed option list.
Backpatch to v18.
Author: Yugo Nagata <nagata@sraoss.co.jp>
Discussion: https://postgr.es/m/20251223021509.19bba68ecbbc70c9f983c2b4@sraoss.co.jp
Backpatch-through: 18
The logical replication parallel apply worker could incorrectly advance
the origin progress during an error or failed apply. This behavior risks
transaction loss because such transactions will not be resent by the
server.
Commit 3f28b2fcac addressed a similar issue for both the apply worker and
the table sync worker by registering a before_shmem_exit callback to reset
origin information. This prevents the worker from advancing the origin
during transaction abortion on shutdown. This patch applies the same fix
to the parallel apply worker, ensuring consistent behavior across all
worker types.
As with 3f28b2fcac, we are backpatching through version 16, since parallel
apply mode was introduced there and the issue only occurs when changes are
applied before the transaction end record (COMMIT or ABORT) is received.
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 16
Discussion: https://postgr.es/m/TY4PR01MB169078771FB31B395AB496A6B94B4A@TY4PR01MB16907.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/TYAPR01MB5692FAC23BE40C69DA8ED4AFF5B92@TYAPR01MB5692.jpnprd01.prod.outlook.com
After waiting for a concurrent updater to finish, heap_lock_tuple()
followed the update chain to lock all tuple versions. However, when
stepping from the initial tuple to the next one, it failed to check
that the next tuple's XMIN matches the initial tuple's XMAX. That's an
important check whenever following an update chain, and the recursive
part that follows the chain did it, but the initial step missed it.
Without the check, if the updating transaction aborts, the updated
tuple is vacuumed away and replaced by an unrelated tuple, the
unrelated tuple might get incorrectly locked.
Author: Jasper Smit <jasper.smit@servicenow.com>
Discussion: https://www.postgresql.org/message-id/CAOG+RQ74x0q=kgBBQ=mezuvOeZBfSxM1qu_o0V28bwDz3dHxLw@mail.gmail.com
Backpatch-through: 14
Since ce0fdbfe9722, a replication slot and an origin are created by each
tablesync worker, whose information is stored in both a catalog and
shared memory (once the origin is set up in the latter case). The
transaction where the origin is created is the same as the one that runs
the initial COPY, with the catalog state of the origin becoming visible
for other sessions only once the COPY transaction has committed. The
catalog state is coupled with a state in shared memory, initialized at
the same time as the origin created in the catalogs. Note that the
transaction doing the initial data sync can take a long time, time that
depends on the amount of data to transfer from a publication node to its
subscriber node.
Now, when a DROP SUBSCRIPTION is executed, all its workers are stopped
with the origins removed. The removal of each origin relies on a
catalog lookup. A worker still running the initial COPY would fail its
transaction, with the catalog state of the origin rolled back while the
shared memory state remains around. The session running the DROP
SUBSCRIPTION should be in charge of cleaning up the catalog and the
shared memory state, but as there is no data in the catalogs the shared
memory state is not removed. This issue would leave orphaned origin
data in shared memory, leading to a confusing state as it would still
show up in pg_replication_origin_status. Note that this shared memory
data is sticky, being flushed on disk in replorigin_checkpoint at
checkpoint. This prevents other origins from reusing a slot position
in the shared memory data.
To address this problem, the commit moves the creation of the origin at
the end of the transaction that precedes the one executing the initial
COPY, making the origin immediately visible in the catalogs for other
sessions, giving DROP SUBSCRIPTION a way to know about it. A different
solution would have been to clean up the shared memory state using an
abort callback within the tablesync worker. The solution of this commit
is more consistent with the apply worker that creates an origin in a
short transaction.
A test is added in the subscription test 004_sync.pl, which was able to
display the problem. The test fails when this commit is reverted.
Reported-by: Tenglong Gu <brucegu@amazon.com>
Reported-by: Daisuke Higuchi <higudai@amazon.com>
Analyzed-by: Michael Paquier <michael@paquier.xyz>
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/aUTekQTg4OYnw-Co@paquier.xyz
Backpatch-through: 14
An unused variable caused a compiler warning on BF animal fairywren, an
snprintf() call was redundant, and some buffer sizes were inconsistent.
Per code review from Tom Lane.
The Makefile's test ifeq ($(PORTNAME), win32) never succeeded due to a
circularity, so only Meson builds were actually compiling the new test
code, partially explaining why CI didn't tell us about the warning
sooner (the other problem being that CompilerWarnings only makes
world-bin, a problem for another commit). Simplify.
Backpatch-through: 16, like commit c507ba55
Author: Bryan Green <dbryan.green@gmail.com>
Co-authored-by: Thomas Munro <tmunro@gmail.com>
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1086088.1765593851%40sss.pgh.pa.us
Previously, if memory context logging was triggered repeatedly and
rapidly while a previous request was still being processed, it could
result in recursive calls to ProcessLogMemoryContextInterrupt().
This could lead to infinite recursion and potentially crash the process.
This commit adds a guard to prevent such recursion.
If ProcessLogMemoryContextInterrupt() is already in progress and
logging memory contexts, subsequent calls will exit immediately,
avoiding unintended recursive calls.
While this scenario is unlikely in practice, it's not impossible.
This change adds a safety check to prevent such failures.
Back-patch to v14, where memory context logging was introduced.
Reported-by: Robert Haas <robertmhaas@gmail.com>
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Atsushi Torikoshi <torikoshia@oss.nttdata.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Artem Gavrilov <artem.gavrilov@percona.com>
Discussion: https://postgr.es/m/CA+TgmoZMrv32tbNRrFTvF9iWLnTGqbhYSLVcrHGuwZvCtph0NA@mail.gmail.com
Backpatch-through: 14
Commit 0decd5e89db9f5edb9b27351082f0d74aae7a9b6 missed
DO_SUBSCRIPTION_REL, leading to assertion failures. In the unlikely use
case of diffing "pg_dump --binary-upgrade" output, spurious diffs were
possible. As part of fixing that, align the DumpableObject naming and
sort order with DO_PUBLICATION_REL. The overall effect of this commit
is to change sort order from (subname, srsubid) to (rel, subname).
Since DO_SUBSCRIPTION_REL is only for --binary-upgrade, accept that
larger-than-usual dump order change. Back-patch to v17, where commit
9a17be1e244a45a77de25ed2ada246fd34e4557d introduced DO_SUBSCRIPTION_REL.
Reported-by: vignesh C <vignesh21@gmail.com>
Author: vignesh C <vignesh21@gmail.com>
Discussion: https://postgr.es/m/CALDaNm2x3rd7C0_HjUpJFbxpAqXgm=QtoKfkEWDVA8h+JFpa_w@mail.gmail.com
Backpatch-through: 17
Operations on unlogged relations should not be WAL-logged. The
brin_initialize_empty_new_buffer() function didn't get the memo.
The function is only called when a concurrent update to a brin page
uses up space that we're just about to insert to, which makes it
pretty hard to hit. If you do manage to hit it, a full-page WAL record
is erroneously emitted for the unlogged index. If you then crash,
crash recovery will fail on that record with an error like this:
FATAL: could not create file "base/5/32819": File exists
Author: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://www.postgresql.org/message-id/CALdSSPhpZXVFnWjwEBNcySx_vXtXHwB2g99gE6rK0uRJm-3GgQ@mail.gmail.com
Backpatch-through: 14
Commit e0f373ee4 fixed up races in Cluster::connect_fails when using
log_like. t/002_client.pl didn't get the memo, though, because it
doesn't use Test::Cluster to perform its custom hook tests. (This is
probably not an issue at the moment, since the log check is only done
after authentication success and not failure, but there's no reason to
wait for someone to hit it.)
Introduce the fix, based on debug2 logging, to its use of log_check() as
well, and move the logic into the test() helper so that any additions
don't need to continually duplicate it.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CAOYmi%2BmrGg%2Bn_X2MOLgeWcj3v_M00gR8uz_D7mM8z%3DdX1JYVbg%40mail.gmail.com
Backpatch-through: 18
The definition of PGoauthBearerRequest uses a temporary SOCKTYPE macro
to hide the difference between Windows and Berkeley socket handles,
since we don't surface pgsocket in our public API. This macro doesn't
need to escape the header, because implementers will choose the correct
socket type based on their platform, so I #undef'd it immediately after
use.
I didn't namespace that helper, though, so if anyone else needs a
SOCKTYPE macro, libpq-fe.h will now unhelpfully get rid of it. This
doesn't seem too far-fetched, given its proximity to existing POSIX
macro names.
Add a PQ_ prefix to avoid collisions, update and improve the surrounding
documentation, and backpatch.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CAOYmi%2BmrGg%2Bn_X2MOLgeWcj3v_M00gR8uz_D7mM8z%3DdX1JYVbg%40mail.gmail.com
Backpatch-through: 18
The test is very sensitive to how backends start and exit, because it
tests dead-end backends which occur when all the connection slots are
in use. The test failed occasionally in the CI, when the backend that
was launched for the raw_connect_works() check lingered for a while,
and exited only later during the test. When it exited, it released a
connection slot, when the test expected all the slots to be in use at
that time.
The 002_connection_limits.pl test had a similar issue: if the backend
launched for safe_psql() in the test initialization lingers around, it
uses up a connection slot during the test, messing up the test's
connection counting. I haven't seen that in the CI, but when I added a
"sleep(1);" to proc_exit(), the test failed.
To make the tests more robust, restart the server to ensure that the
lingering backends doesn't interfere with the later test steps.
In the passing, fix a bogus test name.
Report and analysis by Jelte Fennema-Nio, Andres Freund, Thomas Munro.
Discussion: https://www.postgresql.org/message-id/CAGECzQSU2iGuocuP+fmu89hmBmR3tb-TNyYKjCcL2M_zTCkAFw@mail.gmail.com
Backpatch-through: 18
Previously, ltree_prefix_eq_ci() used lowercasing with the default
collation; while ltree_crc32_sz() used tolower() directly. These were
equivalent only if the default collation provider was libc and the
encoding was single-byte.
Change both to use casefolding with the default collation.
Backpatch through 18, where the casefolding APIs were introduced. The
bug exists in earlier versions, but would require some adaptation.
A REINDEX is required for ltree indexes where the database default
collation is not libc.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Backpatch-through: 18
Discussion: https://postgr.es/m/450ceb6260cad30d7afdf155d991a9caafee7c0d.camel@j-davis.com
Discussion: https://postgr.es/m/01fc00fd66f641b9693d4f9f1af0ccf44cbdfbdf.camel@j-davis.com
Previously, the API for ltree_strncasecmp() took two inputs but only
one length (that of the smaller input). It truncated the larger input
to that length, but that could break a multibyte sequence.
Change the API to be a check for prefix equality (possibly
case-insensitive) instead, which is all that's needed by the
callers. Also, provide the lengths of both inputs.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/5f65b85740197ba6249ea507cddf609f84a6188b.camel%40j-davis.com
Backpatch-through: 14
Commit bae8ca82fd00603ebafa0658640d6e4dfe20af92 anticipated this:
[C] 'function void CacheInvalidateHeapTupleInplace(Relation, HeapTuple, HeapTuple)' has some sub-type changes:
parameter 3 of type 'typedef HeapTuple' was removed
Discussion: https://postgr.es/m/CA+renyU+LGLvCqS0=fHit-N1J-2=2_mPK97AQxvcfKm+F-DxJA@mail.gmail.com
Backpatch-through: 18 only
We already do this in CreateParallelContext, InitializeParallelDSM, and
LaunchParallelWorkers. I suspect the reason why the matching logic was
omitted from ReinitializeParallelDSM is that I failed to realize that
any memory allocation was happening here -- but shm_mq_attach does
allocate, which could result in a shm_mq_handle being allocated in a
shorter-lived context than the ParallelContext which points to it.
That could result in a crash if the shorter-lived context is freed
before the parallel context is destroyed. As far as I am currently
aware, there is no way to reach a crash using only code that is
present in core PostgreSQL, but extensions could potentially trip
over this. Fixing this in the back-branches appears low-risk, so
back-patch to all supported versions.
Author: Jakub Wartak <jakub.wartak@enterprisedb.com>
Co-authored-by: Jeevan Chalke <jeevan.chalke@enterprisedb.com>
Backpatch-through: 14
Discussion: http://postgr.es/m/CAKZiRmwfVripa3FGo06=5D1EddpsLu9JY2iJOTgbsxUQ339ogQ@mail.gmail.com
This commit adds an extra check at the beginning of recovery to ensure
that the redo record of a checkpoint exists before attempting WAL
replay, logging a PANIC if the redo record referenced by the checkpoint
record could not be found. This is the same level of failure as when a
checkpoint record is missing. This check is added when a cluster is
started without a backup_label, after retrieving its checkpoint record.
The redo LSN used for the check is retrieved from the checkpoint record
successfully read.
In the case where a backup_label exists, the startup process already
fails if the redo record cannot be found after reading a checkpoint
record at the beginning of recovery.
Previously, the presence of the redo record was not checked. If the
redo and checkpoint records were located on different WAL segments, it
would be possible to miss a entire range of WAL records that should have
been replayed but were just ignored. The consequences of missing the
redo record depend on the version dealt with, these becoming worse the
older the version used:
- On HEAD, v18 and v17, recovery fails with a pointer dereference at the
beginning of the redo loop, as the redo record is expected but cannot be
found. These versions are good students, because we detect a failure
before doing anything, even if the failure is misleading in the shape of
a segmentation fault, giving no information that the redo record is
missing.
- In v16 and v15, problems show at the end of recovery within
FinishWalRecovery(), the startup process using a buggy LSN to decide
from where to start writing WAL. The cluster gets corrupted, still it
is noisy about it.
- v14 and older versions are worse: a cluster gets corrupted but it is
entirely silent about the matter. The redo record missing causes the
startup process to skip entirely recovery, because a missing record is
the same as not redo being required at all. This leads to data loss, as
everything is missed between the redo record and the checkpoint record.
Note that I have tested that down to 9.4, reproducing the issue with a
version of the author's reproducer slightly modified. The code is wrong
since at least 9.2, but I did not look at the exact point of origin.
This problem has been found by debugging a cluster where the WAL segment
including the redo segment was missing due to an operator error, leading
to a crash, based on an investigation in v15.
Requesting archive recovery with the creation of a recovery.signal or
a standby.signal even without a backup_label would mitigate the issue:
if the record cannot be found in pg_wal/, the missing segment can be
retrieved with a restore_command when checking that the redo record
exists. This was already the case without this commit, where recovery
would re-fetch the WAL segment that includes the redo record. The check
introduced by this commit makes the segment to be retrieved earlier to
make sure that the redo record can be found.
On HEAD, the code will be slightly changed in a follow-up commit to not
rely on a PANIC, to include a test able to emulate the original problem.
This is a minimal backpatchable fix, kept separated for clarity.
Reported-by: Andres Freund <andres@anarazel.de>
Analyzed-by: Andres Freund <andres@anarazel.de>
Author: Nitin Jadhav <nitinjadhavpostgres@gmail.com>
Discussion: https://postgr.es/m/20231023232145.cmqe73stvivsmlhs@awork3.anarazel.de
Discussion: https://postgr.es/m/CAMm1aWaaJi2w49c0RiaDBfhdCL6ztbr9m=daGqiOuVdizYWYaA@mail.gmail.com
Backpatch-through: 14
Now that the prior commits have fixed missing OAuth translations, pull
the bespoke usage of libpq_gettext() for OAUTHBEARER parsing into
oauth_json_set_error() itself, and make that a gettext trigger as well,
to better match what the other sites are doing. Add an _internal()
variant to handle the existing untranslated case.
Suggested-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/0EEBCAA8-A5AC-4E3B-BABA-0BA7A08C361B%40yesql.se
Backpatch-through: 18
Some error messages are generated when OAuth multiplexer operations fail
unexpectedly in the client. Álvaro pointed out that these are both
difficult to translate idiomatically (as they use internal terminology
heavily) and of dubious translation value to end users (since they're
going to need to get developer help anyway). The response parsing engine
has a similar issue.
Remove these from the translation files by introducing internal variants
of actx_error() and oauth_parse_set_error().
Suggested-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/CAOYmi%2BkQQ8vpRcoSrA5EQ98Wa3G6jFj1yRHs6mh1V7ohkTC7JA%40mail.gmail.com
Backpatch-through: 18
Several strings that should have been translated as they passed through
libpq_gettext were not actually being pulled into the translation files,
because I hadn't directly wrapped them in one of the GETTEXT_TRIGGERS.
Move the responsibility for calling libpq_gettext() to the code that
sets actx->errctx. Doing the same in report_type_mismatch() would result
in double-translation, so mark those strings with gettext_noop()
instead. And wrap two ternary operands with gettext_noop(), even though
they're already in one of the triggers, since xgettext sees only the
first.
Finally, fe-auth-oauth.c was missing from nls.mk, so none of that file
was being translated at all. Add it now.
Original patch by Zhijie Hou, plus suggested tweaks by Álvaro Herrera
and small additions by me.
Reported-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Co-authored-by: Álvaro Herrera <alvherre@kurilemu.de>
Co-authored-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/TY4PR01MB1690746DB91991D1E9A47F57E94CDA%40TY4PR01MB16907.jpnprd01.prod.outlook.com
Backpatch-through: 18
This removes a never-used CacheInvalidateHeapTupleInplace() parameter.
It adds README content about inplace update visibility in logical
decoding. It rewrites other comments.
Back-patch to v18, where commit 243e9b40f1b2dd09d6e5bf91ebf6e822a2cd3704
first appeared. Since this removes a CacheInvalidateHeapTupleInplace()
parameter, expect a v18 ".abi-compliance-history" edit to follow. PGXN
contains no calls to that function.
Reported-by: Paul A Jungwirth <pj@illuminatedcomputing.com>
Reported-by: Ilyasov Ian <ianilyasov@outlook.com>
Reviewed-by: Paul A Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Surya Poondla <s_poondla@apple.com>
Discussion: https://postgr.es/m/CA+renyU+LGLvCqS0=fHit-N1J-2=2_mPK97AQxvcfKm+F-DxJA@mail.gmail.com
Backpatch-through: 18
