SquareGenerator is a FrameGenerator that draws 10 randomly sized and colored
squares. Between each new generated frame, the squares are moved slightly
towards the lower right corner.
BUG=webrtc:7192
Review-Url: https://codereview.webrtc.org/2705973002
Cr-Commit-Position: refs/heads/master@{#16870}
Currently, parameters are periodically updated, but the TargetBitrate
message is only sent if a new bitrate is set. It should be sent
periodically to indicate the signaled bitrate is valid and to prevent
stale values due to loss of RTCP packets.
BUG=webrtc:6897
Review-Url: https://codereview.webrtc.org/2616393003
Cr-Commit-Position: refs/heads/master@{#16096}
Moves webrtc/common_video/rotation.h and parts of
webrtc/common_video/include/video_frame_buffer.h and
webrtc/video_frame.h, and adds to a new GN target api:video_frame_api.
BUG=webrtc:5880
Review-Url: https://codereview.webrtc.org/2517173004
Cr-Commit-Position: refs/heads/master@{#15993}
A recent cl (https://codereview.webrtc.org/2510583002) introduced an
issue where the initial rate allocation (call to VideoBitrateAllocator
and any associated temporal layers) uses framerate = 0 fps. This may
cause issues, including having the rate control in ScreenshareLayers
ramp up too slowly.
This CL make the initial call use VideoCodec.maxFramerate as framerate.
Also expanded unit tests.
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2513383002
Cr-Commit-Position: refs/heads/master@{#15166}
This is yet another reland of https://codereview.webrtc.org/2434073003/
including two fixes:
1. SimulcastRateAllocator did not handle the screenshare settings properly for numSimulcastStreams = 1. Additional test case was added for that.
2. In VideoSender, when rate allocation is updated after setting a new VideoCodec config, only update the state of the EncoderParameters, but don't actually run SetRateAllocation on the encoder itself. This caused some problems upstreams.
Please review only the changes after patch set 1.
Original description:
Extract bitrate allocation of spatial/temporal layers out of codec impl.
This CL makes a number of intervowen changes:
* Add BitrateAllocation struct, that contains a codec independent view
of how the target bitrate is distributed over spatial and temporal
layers.
* Adds the BitrateAllocator interface, which takes a bitrate and frame
rate and produces a BitrateAllocation.
* A default (non layered) implementation is added, and
SimulcastRateAllocator is extended to fully handle VP8 allocation.
This includes capturing TemporalLayer instances created by the
encoder.
* ViEEncoder now owns both the bitrate allocator and the temporal layer
factories for VP8. This allows allocation to happen fully outside of
the encoder implementation.
This refactoring will make it possible for ViEEncoder to signal the
full picture of target bitrates to the RTCP module.
BUG=webrtc:6301
R=stefan@webrtc.org
Review URL: https://codereview.webrtc.org/2510583002 .
Cr-Commit-Position: refs/heads/master@{#15105}
Reason for revert:
Seems to be causing flakiness in perf test:
FullStackTest.ScreenshareSlidesVP8_2TL_LossyNet
Original issue's description:
> Reland of Issue 2434073003: Extract bitrate allocation ...
>
> This is a reland of https://codereview.webrtc.org/2434073003/ including
> some fixes for failing test cases.
>
> Original description:
>
> Extract bitrate allocation of spatial/temporal layers out of codec impl.
>
> This CL makes a number of intervowen changes:
>
> * Add BitrateAllocation struct, that contains a codec independent view
> of how the target bitrate is distributed over spatial and temporal
> layers.
>
> * Adds the BitrateAllocator interface, which takes a bitrate and frame
> rate and produces a BitrateAllocation.
>
> * A default (non layered) implementation is added, and
> SimulcastRateAllocator is extended to fully handle VP8 allocation.
> This includes capturing TemporalLayer instances created by the
> encoder.
>
> * ViEEncoder now owns both the bitrate allocator and the temporal layer
> factories for VP8. This allows allocation to happen fully outside of
> the encoder implementation.
>
> This refactoring will make it possible for ViEEncoder to signal the
> full picture of target bitrates to the RTCP module.
>
> BUG=webrtc:6301
>
> Committed: https://crrev.com/647bf43dcb2fd16fccf276bd94dc4400728bb405
> Cr-Commit-Position: refs/heads/master@{#15023}
TBR=mflodman@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2491393002
Cr-Commit-Position: refs/heads/master@{#15026}
This is a reland of https://codereview.webrtc.org/2434073003/ including
some fixes for failing test cases.
Original description:
Extract bitrate allocation of spatial/temporal layers out of codec impl.
This CL makes a number of intervowen changes:
* Add BitrateAllocation struct, that contains a codec independent view
of how the target bitrate is distributed over spatial and temporal
layers.
* Adds the BitrateAllocator interface, which takes a bitrate and frame
rate and produces a BitrateAllocation.
* A default (non layered) implementation is added, and
SimulcastRateAllocator is extended to fully handle VP8 allocation.
This includes capturing TemporalLayer instances created by the
encoder.
* ViEEncoder now owns both the bitrate allocator and the temporal layer
factories for VP8. This allows allocation to happen fully outside of
the encoder implementation.
This refactoring will make it possible for ViEEncoder to signal the
full picture of target bitrates to the RTCP module.
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2488833004
Cr-Commit-Position: refs/heads/master@{#15023}
Reason for revert:
Breaks perf tests.
Original issue's description:
> Extract bitrate allocation of spatial/temporal layers out of codec impl.
>
> This CL makes a number of intervowen changes:
>
> * Add BitrateAllocation struct, that contains a codec independent view
> of how the target bitrate is distributed over spatial and temporal
> layers.
>
> * Adds the BitrateAllocator interface, which takes a bitrate and frame
> rate and produces a BitrateAllocation.
>
> * A default (non layered) implementation is added, and
> SimulcastRateAllocator is extended to fully handle VP8 allocation.
> This includes capturing TemporalLayer instances created by the
> encoder.
>
> * ViEEncoder now owns both the bitrate allocator and the temporal layer
> factories for VP8. This allows allocation to happen fully outside of
> the encoder implementation.
>
> This refactoring will make it possible for ViEEncoder to signal the
> full picture of target bitrates to the RTCP module.
>
> BUG=webrtc:6301
>
> Committed: https://crrev.com/8f46c679d24a05b3f08e02c6d91ec9637f34e24f
> Cr-Commit-Position: refs/heads/master@{#14998}
TBR=stefan@webrtc.org,perkj@webrtc.org,mflodman@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2489843002
Cr-Commit-Position: refs/heads/master@{#15001}
This CL makes a number of intervowen changes:
* Add BitrateAllocation struct, that contains a codec independent view
of how the target bitrate is distributed over spatial and temporal
layers.
* Adds the BitrateAllocator interface, which takes a bitrate and frame
rate and produces a BitrateAllocation.
* A default (non layered) implementation is added, and
SimulcastRateAllocator is extended to fully handle VP8 allocation.
This includes capturing TemporalLayer instances created by the
encoder.
* ViEEncoder now owns both the bitrate allocator and the temporal layer
factories for VP8. This allows allocation to happen fully outside of
the encoder implementation.
This refactoring will make it possible for ViEEncoder to signal the
full picture of target bitrates to the RTCP module.
BUG=webrtc:6301
Review-Url: https://codereview.webrtc.org/2434073003
Cr-Commit-Position: refs/heads/master@{#14998}
This refactoring allows runtime checks that functions that access
codec specific information are using the correct union member.
The API also allows replacing the union with another implementation
without changes at calling sites.
BUG=webrtc:6603
Review-Url: https://codereview.webrtc.org/2001533003
Cr-Commit-Position: refs/heads/master@{#14775}
When the target bitrate is zero, currently VideoSendStream.Stats.target_media_bitrate_bps show the last set rate before the target was set to zero.
BUG=webrtc::5687 b/29574845
Review-Url: https://codereview.webrtc.org/2122743003
Cr-Commit-Position: refs/heads/master@{#13386}
Remove ViEEncoder::SetNetworkStatus.
Original cl description:
This cl removed ViEEncoder::SetNetworkStatus. Instead the PacedSender will report that frames can not be sent when the network is down and the BitrateController will report an estimated available bandwidth of 0 bps.
Patchset #1 is a pure reland.
Patchset #2 change the bitrate allocator to always return an initial bitrate >0 regardless of the estimates. The observer will be notified though if the network is down.
BUG=webrtc:5687
Review-Url: https://codereview.webrtc.org/1972183004
Cr-Commit-Position: refs/heads/master@{#12743}
SSRC knowledge is contained withing VideoSendStream. That also means that debug recording is moved to VideoSendStream.
I think that make sence since that allows debug recording with external encoder implementations one day.
BUG=webrtc:5687
Review-Url: https://codereview.webrtc.org/1936503002
Cr-Commit-Position: refs/heads/master@{#12632}
And move encoder name cb to VCMSendStatisticsCallback.
BUG=webrtc:5687
Review-Url: https://codereview.webrtc.org/1900193004
Cr-Commit-Position: refs/heads/master@{#12596}
Reason for revert:
A fix is being prepared downstream so this can now go in.
Original issue's description:
> Revert of Deprecate VCMPacketizationCallback::SendData and use EncodedImageCallback instead. (patchset #5 id:80001 of https://codereview.webrtc.org/1897233002/ )
>
> Reason for revert:
> API changes broke downstream.
>
> Original issue's description:
> > Deprecate VCMPacketizationCallback::SendData and use EncodedImageCallback instead.
> > EncodedImageCallback is used by all encoder implementations and seems to be what we should try to use in the transport.
> > EncodedImageCallback can of course be cleaned up in the future.
> >
> > This moves creation of RTPVideoHeader from the GenericEncoder to the PayLoadRouter.
> >
> > BUG=webrtc::5687
> >
> > Committed: https://crrev.com/f5d55aaecdc39e9cc66eb6e87614f04afe28f6eb
> > Cr-Commit-Position: refs/heads/master@{#12436}
>
> TBR=stefan@webrtc.org,pbos@webrtc.org,perkj@webrtc.org
> # Skipping CQ checks because original CL landed less than 1 days ago.
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
> BUG=webrtc:5687
>
> Committed: https://crrev.com/a261e6136655af33f283eda8e60a6dd93dd746a4
> Cr-Commit-Position: refs/heads/master@{#12441}
TBR=stefan@webrtc.org,pbos@webrtc.org,perkj@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc:5687
Review URL: https://codereview.webrtc.org/1905583002
Cr-Commit-Position: refs/heads/master@{#12442}
Reason for revert:
API changes broke downstream.
Original issue's description:
> Deprecate VCMPacketizationCallback::SendData and use EncodedImageCallback instead.
> EncodedImageCallback is used by all encoder implementations and seems to be what we should try to use in the transport.
> EncodedImageCallback can of course be cleaned up in the future.
>
> This moves creation of RTPVideoHeader from the GenericEncoder to the PayLoadRouter.
>
> BUG=webrtc::5687
>
> Committed: https://crrev.com/f5d55aaecdc39e9cc66eb6e87614f04afe28f6eb
> Cr-Commit-Position: refs/heads/master@{#12436}
TBR=stefan@webrtc.org,pbos@webrtc.org,perkj@webrtc.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=webrtc::5687
Review URL: https://codereview.webrtc.org/1903193002
Cr-Commit-Position: refs/heads/master@{#12441}
EncodedImageCallback is used by all encoder implementations and seems to be what we should try to use in the transport.
EncodedImageCallback can of course be cleaned up in the future.
This moves creation of RTPVideoHeader from the GenericEncoder to the PayLoadRouter.
BUG=webrtc::5687
Review URL: https://codereview.webrtc.org/1897233002
Cr-Commit-Position: refs/heads/master@{#12436}
An earlier change moved SetRates to happen on every input frame, but
encoders with internal sources don't receive input frames, so they
weren't getting updated bitrate (and framerate) signals.
BUG=
Review URL: https://codereview.webrtc.org/1682253005
Cr-Commit-Position: refs/heads/master@{#12354}
This argument is never used as a reference and the pointer that's bound
to the const reference may be nullptr. This is undefined behavior and
barks under UBSan.
BUG=webrtc:5124
R=stefan@webrtc.org
Review URL: https://codereview.webrtc.org/1642863003 .
Cr-Commit-Position: refs/heads/master@{#11418}
Constructing default options is racy when initializing multiple VP8
encoders in parallel. This is only used for VP8 temporal layers. Adding
TemporalLayerFactory to VP8 codec specifics instead of generic options.
Removes the last webrtc::Config uses/includes from video code.
Also removes VideoCodec equality operators which are no longer in use.
BUG=webrtc:5410
R=stefan@webrtc.orgTBR=mflodman@webrtc.org
Review URL: https://codereview.webrtc.org/1606613003 .
Cr-Commit-Position: refs/heads/master@{#11307}
Macro incorrectly displays DISABLED_ON_ANDROID in test names for
parameterized tests under --gtest_list_tests, causing tests to be
disabled on all platforms since they contain the DISABLED_ prefix rather
than their expanded variants.
This expands the macro variants to inline if they're disabled or not,
and removes building some tests under configurations where they should
fail, instead of building them but disabling them by default.
The change also removes gtest_disable.h as an unused include from many
other files.
BUG=webrtc:5387, webrtc:5400
R=kjellander@webrtc.org, phoglund@webrtc.orgTBR=henrik.lundin@webrtc.org
Review URL: https://codereview.webrtc.org/1547343002 .
Cr-Commit-Position: refs/heads/master@{#11150}
Also adds a RTC_CHECK in VideoReceiveStream that verifies that decoders
aren't null, since this will attempt to deregister a codec which would
previously fail with an obscure stack trace not indicating what actually
was wrong.
BUG=webrtc:5249
R=stefan@webrtc.org
Review URL: https://codereview.webrtc.org/1479793002 .
Cr-Commit-Position: refs/heads/master@{#10821}
The main purpose was the interface-> include rename, but other files
were also moved, eliminating the "main" dir.
To avoid breaking downstream, the "interface" directories were copied
into a new "video_coding/include" dir. The old headers got pragma
warnings added about deprecation (a very short deprecation since I plan
to remove them as soon downstream is updated).
Other files also moved:
video_coding/main/source -> video_coding
video_coding/main/test -> video_coding/test
BUG=webrtc:5095
TESTED=Passing compile-trybots with --clobber flag:
git cl try --clobber --bot=win_compile_rel --bot=linux_compile_rel --bot=android_compile_rel --bot=mac_compile_rel --bot=ios_rel --bot=linux_gn_rel --bot=win_x64_gn_rel --bot=mac_x64_gn_rel --bot=android_gn_rel -m tryserver.webrtc
R=stefan@webrtc.org, tommi@webrtc.org
Review URL: https://codereview.webrtc.org/1417283007 .
Cr-Commit-Position: refs/heads/master@{#10694}
