Specially for devices with high echo path gain, even low render signal can allow the linear filter of the AEC3 to converge. However, the conditions that were used for updating the ERLE avoided to update that estimation. In this commit, we allow adapting the ERLE estimator using even low render signal but the update of the ERLE is constraint in a way that decreases are not allowed.
Bug: webrtc:9776
Change-Id: Ic4331efcc47a0b05f394cdea9a88f336292de5a1
Reviewed-on: https://webrtc-review.googlesource.com/101641
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24859}
Speeds up adaptation of the matched filter of the delay estimator by
allowing the estimated echo and the error signal (microphone minus
estimated echo) to be saturated. Only microphone saturation pauses
the filter adaptation.
Bug: webrtc:9773
Change-Id: I8b8400539fde3ee821f36a95818bece02ddd626b
Reviewed-on: https://webrtc-review.googlesource.com/101341
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24802}
A (actually several weeks) while ago, we noticed an error with the
WebRTC.Audio.Agc2.EstimatedNoiseLevel histogram. It always reported
the value 0. Here is why:
The histogram bins go from 0 to 100. But the value logged is dBFS. It is
always less than or equal to 0. This CL changes the bins.
Bug: webrtc:7494
Change-Id: I45fd122e98f9396f9871bc965a708987bd1815f6
Reviewed-on: https://webrtc-review.googlesource.com/101340
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24800}
Right after a volume decrease, the echo path estimate is overestimated and, as a side effect, the nearend signal is also overestimated. Due to that, the suppression gains are kept high avoiding the suppression of echoes. In this CL the neared power spectrum estimation is limited to a level given by the power spectrum or the microphone input signal. Additionally, the minimum gain that is computed inside the suppressor is also modified. Instead of using the nearend power spectrum that is now bounded, the power spectrum of the signal after the linear echo canceler is used.
Bug: webrtc:9762
Change-Id: Ia24cd2ce248f2c2ba124711b75acff3b8c5cfa9f
Reviewed-on: https://webrtc-review.googlesource.com/100720
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24796}
Replace calls to .str() which copies with .Release which moves in cases where that's safe.
This CL was generated by this command:
git grep -l 'StringBuilder' |
xargs perl -i -0 -pe "s/(rtc::StringBuilder (\S+);.*?return )\\g2.str\(\)/\$1\$2.Release\(\)/sg"
Bug: webrtc:8982
Change-Id: If4dadbeb039df010aaaa9e58da81c1971a84fe8f
Reviewed-on: https://webrtc-review.googlesource.com/100307
Commit-Queue: Jonas Olsson <jonasolsson@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24790}
Original CL:
https://webrtc-review.googlesource.com/c/src/+/97603
- Changes EchoCancellationImpl to inherit privately from
EchoCancellation.
- Removes usage of AudioProcessing::echo_cancellation() inside most of
the audio processing module and unit tests.
- Default-enables metrics collection in AEC2.
The CL breaks audioproc_f backwards compatibility: It can no longer
use all recorded settings (drift compensation, suppression level), but
prints an error message when such settings are encountered.
Revert CL:
https://webrtc-review.googlesource.com/c/src/+/100305
Bug: webrtc:9535
TBR: gustaf@webrtc.org
Change-Id: I9248046b3a6a82df6221e502481836948643a991
Reviewed-on: https://webrtc-review.googlesource.com/100461
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24749}
This CL:
-Adds the option to log the aec3 parameters used for a simulation.
-Cleans up the logging of the custom setting of aec3 parameters to
instead rely on the newly added logging.
Bug: webrtc:8671
Change-Id: If73a73d08e5a5077416033ded598a83fb1ade3e0
Reviewed-on: https://webrtc-review.googlesource.com/100381
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24742}
The test is refitted to use the AudioProcessingStats struct to get
reference data.
The old metrics do not map entirely injectively to the new ones, so the
reference protobuf and files are updated as well.
Bug: webrtc:9535
Change-Id: I546dca2979380e03895af0077bfc77ffd24abe36
Reviewed-on: https://webrtc-review.googlesource.com/100100
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24740}
This reverts commit 1a03960e632a04e2ff866f2048cc36146af83e41.
Reason for revert: breaks downstream projects.
Original change's description:
> Remove APM internal usage of EchoCancellation
>
> This CL:
> - Changes EchoCancellationImpl to inherit privately from
> EchoCancellation.
> - Removes usage of AudioProcessing::echo_cancellation() inside most of
> the audio processing module and unit tests.
> - Default-enables metrics collection in AEC2.
>
> This CL breaks audioproc_f backwards compatibility: It can no longer
> use all recorded settings (drift compensation, suppression level), but
> prints an error message when such settings are encountered.
>
> Some code in audio_processing_unittest.cc still uses the old interface.
> I'll handle that in a separate change, as it is not as straightforward
> to preserve coverage.
>
> Bug: webrtc:9535
> Change-Id: Ia4d4b8d117ccbe516e5345c15d37298418590686
> Reviewed-on: https://webrtc-review.googlesource.com/97603
> Commit-Queue: Sam Zackrisson <saza@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#24724}
TBR=gustaf@webrtc.org,saza@webrtc.org
Change-Id: Ifdc4235f9c5ee8a8a5d32cc8e1dda0853b941693
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:9535
Reviewed-on: https://webrtc-review.googlesource.com/100305
Reviewed-by: Sergey Silkin <ssilkin@webrtc.org>
Commit-Queue: Sergey Silkin <ssilkin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24729}
This CL:
- Changes EchoCancellationImpl to inherit privately from
EchoCancellation.
- Removes usage of AudioProcessing::echo_cancellation() inside most of
the audio processing module and unit tests.
- Default-enables metrics collection in AEC2.
This CL breaks audioproc_f backwards compatibility: It can no longer
use all recorded settings (drift compensation, suppression level), but
prints an error message when such settings are encountered.
Some code in audio_processing_unittest.cc still uses the old interface.
I'll handle that in a separate change, as it is not as straightforward
to preserve coverage.
Bug: webrtc:9535
Change-Id: Ia4d4b8d117ccbe516e5345c15d37298418590686
Reviewed-on: https://webrtc-review.googlesource.com/97603
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24724}
This CL fixes a bug in the filter output transition when the 'from' input
points to the same array as the output. It also includes a slight
improvement to the transition by starting one sample earlier than
previously.
Bug: webrtc:9741,chromium:882789
Change-Id: Ifd5f16c1ac88a74d93499e7f4b4c0e5cb3e4976f
Reviewed-on: https://webrtc-review.googlesource.com/99540
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24683}
Added back the 'agc2 level estimation' flag. Also added a flag for
moving the level measurement before AEC and NS. This is to run offline
experiments with audioproc_f.
Bug: webrtc:7494
Change-Id: I3e3ffceede7166b754130be2b707b620ba527e9f
Reviewed-on: https://webrtc-review.googlesource.com/97442
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24657}
This CL adjusts the behavior of the AEC3 echo suppressor behavior
initially in the call, and when there has been delay changes. The
results is that short echo blips/bursts present in some such cases
no longer occur.
In particular this CL:
-Ensures that the suppressor back-off under stationary render
conditions does not occur until the linear filter has had the
ability to converge.
-Ensures that a previously converged filter behavior detection
is not sticky for stable and linear echo paths, which in turn
prevents echo leakage due to the more liberal echo suppressor
behavior applied on such platforms.
-Removes a bug that caused a random and jittery behavior for
the usage of the linear filter output initially in the calls
and after echo path changes
Bug: webrtc:9737, chromium:882396
Change-Id: Id2b46e366dc58ab8137f19ed59a2034c89ca3087
Reviewed-on: https://webrtc-review.googlesource.com/99063
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24656}
Also read and apply settings when parsing and replaying dumps.
The implementation contains
* an extra field in debug.proto for the runtime settings
* code in AudioProcessingImpl to initiate the logging of the RS to the
AecDump
* code in aec_dump/ to log the RS in the AecDump
* code in test/ for re-playing the RS. E.g. for APM simulation with
audioproc_f.
Bug: webrtc:9138
Change-Id: Ia2a00537c2eb19484ff442fbffd0b95f8495516f
Reviewed-on: https://webrtc-review.googlesource.com/70502
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24647}
This CL introduces a new behavior for leveraging early information
about the delay that is acquired before the standard delay estimate
has been established.
To simplify the process of setting the parameters for that, the CL
also surfaces the delay estimator parameters to the config struct.
Bug: webrtc:9720,chromium: 880686
Change-Id: If886813f70cd805bd37752c63913d28398f1c6fe
Reviewed-on: https://webrtc-review.googlesource.com/97860
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24614}
This CL replaces std::o?stringstream with rtc::StringBuilder where that's possible to do without changing any of the surrounding code. It also updates includes and build files as appropriate.
The CL was generated by running 'git grep -l -P std::o?stringstream | xargs perl -pi -e "s/std::o?stringstream/rtc::StringBuilder/g"'. Then I've manually updated the #includes and BUILD files, run 'git cl format' and unstaged any file that would need more complex fixes.
Bug: webrtc:8982
Change-Id: Ibc32153f4a3fd177e260b6ad05ce393972549357
Reviewed-on: https://webrtc-review.googlesource.com/98460
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Jonas Olsson <jonasolsson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24605}
This CL enables -Wexit-time-destructors and -Wglobal-constructors on
rtc_static_library and rtc_source_set build targets.
It also adds the possibility to suppress these warnings because
they trigger in a few places.
The long term goal is to avoid regressions on this and remove all the
suppressions.
Bug: webrtc:9693
Change-Id: I4c1ecc137ef9e87ec5e66981ce95d96fb082727c
Reviewed-on: https://webrtc-review.googlesource.com/98380
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24604}
This was done by
* adding an EchoMetric class to EvaluationScore
* passing an echo metric binary path from the cmd arguments to the
EvaluationScoreWorkerFactory
* passing the render input filepath to the Evaluator.
The echo score is supposed to be computed by the provided binary. It
should print the echo score in [0.0, 1.0] to a text file. It should
satisfy the cmd flags in its invocation in EchoMetric._Run()
Bug: webrtc:7494
Change-Id: I397013d6ed17659ea01d0623d98a14d4fcdcc161
Reviewed-on: https://webrtc-review.googlesource.com/97022
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24537}
This CL introduces the ability to control the usage of the shadow filter
output in the echo canceller output.
Bug: webrtc:9694,chromium:879451
Change-Id: I01f90de60de1799b32892051c176bda5e1a8d33e
Reviewed-on: https://webrtc-review.googlesource.com/97020
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24506}
The intelligibility enhancer is always disabled and it is the only non-test
target using the lapped transform in common_audio (which we planned to remove).
Bug: webrtc:9689, webrtc:5298
Change-Id: Ida65d3aa11ac366471e7e5cbc053108b376c67d8
Reviewed-on: https://webrtc-review.googlesource.com/96460
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24504}
CustomAudioAnalyzer is an interface of a component into APM that
reads AudioBuffer without changing it.
The APM sub-module is optional. It operates in full band.
As described in the comments, it is an experimental interface which
may be changed in the nearest future.
Change-Id: I21edf729d97947529256407b10fa4b5219bb2bf5
Bug: webrtc:9678
Reviewed-on: https://webrtc-review.googlesource.com/96560
Reviewed-by: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Commit-Queue: Valeriia Nemychnikova <valeriian@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24481}
During this work a parameter is added to the configuration file for the AEC3 that allows to enable or disable the use of a different ERLE estimation for the render onsets.
Bug: webrtc:9677
Change-Id: I467f2cd20683fee06b69c0ba51a90816c9e14f29
Reviewed-on: https://webrtc-review.googlesource.com/96082
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24470}
- Changes in the early reverberation estimation.
- Code optimization by avoiding squaring the whole impulse response.
Bug: webrtc:9651
Change-Id: Iefd4f5ad52a2584d21b20934db1fae5cb1bc81ed
Reviewed-on: https://webrtc-review.googlesource.com/95483
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24464}
Disables the faster filter adaptation in the event of
microphone gain changes as it sometimes impacted transparency
negatively.
Bug: webrtc:9526,chromium:863826
Change-Id: I48fb6dd45440518aaf94b6469d6bb891247ea4ab
Reviewed-on: https://webrtc-review.googlesource.com/95143
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24461}
Removing the some kill switches from the AEC3 codebase. CL is tested for
bit exactness.
Bug: webrtc:8671
Change-Id: I6ecdb1b5ccb05dca79bf0a0cd471f53d79d71d7e
Reviewed-on: https://webrtc-review.googlesource.com/96181
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24460}
When FixedGainController::SetGain() is called first on a large value (e.g., 40 dB)
and afterwards on a smaller one (e.g., 0 dB), the limiter used by FixedGainController
takes time (about 10-20 seconds) to converge. During that period, the audio is not
audible and the volume slowly increases.
Even if switching from 40 dB to 0 dB is unlikely, this behavior can be corrected by
resetting the limiter every time that FixedGainController::SetGain() is called.
This eliminates the undesired effect described above even when the transient is short.
Bug: webrtc:7494
Change-Id: I419b8986d2181448b4671cdbbd1c256dfb460216
Reviewed-on: https://webrtc-review.googlesource.com/94902
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Alessio Bazzica <alessiob@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24451}
This CL adds adaptive handling of platforms where the echo path has
a strong gain above 10 kHz. A configurable offset is adaptively applied
depending on the amount of echo and mode of the echo suppressor.
Bug: webrtc:9663
Change-Id: I27dde6dc23b04a76a3be8c49d7fc9e226b9137e6
Reviewed-on: https://webrtc-review.googlesource.com/95947
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24448}
Disable the use of ERLE uncertainty with a diverged filter as it has
been shown to make transparency worse.
Bug: webrtc:9668
Change-Id: I5e23665def187c0d1cf47a029c4ebc950e79bb44
Reviewed-on: https://webrtc-review.googlesource.com/96140
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24446}
This CL allows selecting an echo suppressor behavior which is specific
for whether the nearend is dominant, or the echo is dominant.
The changes in this CL are bitexact.
Bug: webrtc:9660
Change-Id: Ie32e65efe47e692de6d6a22a7ad3b469d745fd6b
Reviewed-on: https://webrtc-review.googlesource.com/95725
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24434}
The AGC2 is enabled by flipping
AudioProcessing::Config::GainController2::enabled. The flag enables
both AdaptiveAgc and FixedGainController. Before this CL, there was no
way(*) to only enable the FixedGainController. After this CL, it's
also possible to flip the setting
|AudioProcessing::Config::GainController2::adaptive_digital_mode|. The
default is |true|, which is the previous behavior.
* Except for instantiating and setting it up outside of the APM like
it's done in the AudioMixer.
Bug: webrtc:7494
Change-Id: I506e93b6687221ac467f083fa8db3d45c98c1b83
Reviewed-on: https://webrtc-review.googlesource.com/95426
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24432}
This CL removes the UpdateGainIncrease code that is not used anymore.
The CL has been tested for bit exactness.
Bug: webrtc:8671
Change-Id: I4fcf26c3b4b5bba760ee139416ddefac86a36c2e
Reviewed-on: https://webrtc-review.googlesource.com/95940
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24425}
This CL removes some of the unused code in the suppressor. The CL has
been tested for bit exactness.
Bug: webrtc:8671
Change-Id: I960f9445dfd109cf1d5790debb8758872b5b8d0d
Reviewed-on: https://webrtc-review.googlesource.com/95682
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24417}
This CL adds a quiet mode for audioproc_f and hooks up the verbose
output of the AEC3 settings read from the JSON input file to that.
Bug: webrtc:8671
Change-Id: I93bbd1efc6502649da7b2b3e9f7557e9c184b0ed
Reviewed-on: https://webrtc-review.googlesource.com/95700
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24416}
The introduction of the new AEC proxies caused audioproc_f to fail.
This CL corrects audioproc_f so that the AEC2 and AECM echo cancellers
are properly activated using the new AEC proxies.
Bug: webrtc:9535
Change-Id: I48b9deaad873aee597f56ebd33814420024e0d58
Reviewed-on: https://webrtc-review.googlesource.com/95645
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24405}
This CL removes the unused coherence computation from AEC3. This CL
only removes unused code, the output of AEC3 does not change.
Bug: webrtc:8671
Change-Id: Ie127c5ec64e29414f1e1570511d57a4d09fc9145
Reviewed-on: https://webrtc-review.googlesource.com/95650
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24403}
This CL adds functionality for applying an optional fixed delay in AEC3
to the capture signal
Bug: webrtc:9647
Change-Id: Id3b3f896bcf203e6611298dc804c3c80da9f1883
Reviewed-on: https://webrtc-review.googlesource.com/95142
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24399}
The introduction of the new AEC proxies caused audioproc_f to fail.
This CL corrects audioproc_f so that the AEC2 and AECM echo cancellers
are properly activated using the new AEC proxies.
Bug: webrtc:9535
Change-Id: I0e1462fa6e35944f7dbb02580f1db09401c8f7c8
Reviewed-on: https://webrtc-review.googlesource.com/95484
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24394}
This CL:
-Adds another config parameter that controls the duration of the initial
state.
-Adds reading of that parameter in audioproc_f from the json settings file.
-Adds missing reading of another parameter in audioproc_f from the json
settings file.
Bug: webrtc:8671
Change-Id: Ie6164c360492de5e6b0ade8838bbabe214560b5e
Reviewed-on: https://webrtc-review.googlesource.com/94621
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24360}
