This CL just moves code around to prepare for an upcoming
CL where more stats collection is added to scenario tests.
Bug: webrtc:10365
Change-Id: I8a960e44fd11fc36047677c4d8dfc0af96aacb22
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132002
Commit-Queue: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27519}
These parameters are nullable in the JS API.
This allows cleaner handling of "unset" vs "set" in Chrome.
Backwards compatibility note: Behavior should not change, even for users
who set the values explicitly to -1 in the DataChannelInit struct.
Those who try to read back the value will get a compile-time error.
Bug: chromium:854385
Change-Id: Ib488ca5f70bc24ba8b4a3f71b506434c4d2c60b2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131381
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Commit-Queue: Harald Alvestrand <hta@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27507}
According to the spec, RID values should be constrained to only
alpha-numeric values. This was not enforced in our implementation to
allow for more flexibility.
It has been brought to our attention that some values that we currently
consider legal (such as the '~', '=' ';' characters) might cause confusion
with the simulcast syntax that uses these characters to indicate other
meanings.
What's worse, is that some characters, when used in RIDs (such as
\u{1f937} \u{1f4a9} and \u{1f926}) cause uncontrollable laughter for some
users which might also be a health hazard.
This change resolves these issues by restricting RIDs to alpha-numeric.
Bug: webrtc:10491
Change-Id: I16e262c87525d0289764beacd098e1525a355463
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/132061
Reviewed-by: Steve Anton <steveanton@webrtc.org>
Commit-Queue: Amit Hilbuch <amithi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27499}
This change refactors the FrameDecryptorInterface to use the new API. The new
API surface simply moves bytes_written to the return type and implements a
simple Status type.
Bug: webrtc:10512
Change-Id: I622c5d344d58e618853c94c2f691cf7c8fb73a36
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131460
Reviewed-by: Steve Anton <steveanton@webrtc.org>
Reviewed-by: Fredrik Solenberg <solenberg@webrtc.org>
Reviewed-by: Rasmus Brandt <brandtr@webrtc.org>
Reviewed-by: Stefan Holmer <stefan@webrtc.org>
Commit-Queue: Benjamin Wright <benwright@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27497}
This CL does two things:
* It ensures that video quality analysis is always finished when a
Scenario test is stopped. This ensures consistency between different
task queue implementations.
* It disables one real time test that is too heavy to run on IOS
ARM64 debug builds.
Bug: webrtc:10515
Change-Id: I34b59ecde6f2b68c399734a43ecdbc7223725b17
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131388
Commit-Queue: Sebastian Jansson <srte@webrtc.org>
Reviewed-by: Artem Titarenko <artit@google.com>
Cr-Commit-Position: refs/heads/master@{#27495}
See https://webrtc-review.googlesource.com/c/src/+/121764 for the
overall vision.
This CL adds a multistream Opus decoder. It's a new code-path to not
interfere with the standard Opus decoder. We introduce new SDP syntax,
which uses terminology of RFC 7845. We also set up the decoder side to
parse it. The encoder part will come in a later CL.
E.g. this is the new SDP syntax for 6.1 surround sound:
"multiopus/48000/6 channel_mapping=0,4,1,2,3,5 num_streams=4 coupled_streams=2"
Bug: webrtc:8649
Change-Id: Ifbc584cbb6d07aed373f223512a20d6d72cec5ec
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/129768
Commit-Queue: Alex Loiko <aleloi@webrtc.org>
Reviewed-by: Oskar Sundbom <ossu@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27493}
The name EncoderRtcpFeedback is more appropriate because:
1. "Callback" implies a single function exposed, which is
not the case.
2. We intend to add OnLossNotification() to the same class.
Bug: webrtc:10501
Change-Id: I75b2e06eb070e85e872eba9fbc354aa4b68c7993
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131289
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Reviewed-by: Erik Språng <sprang@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27490}
When a LossNotification RTCP message is received, the sequence numbers
it refers to must be converted to timestamps before passing the message
down to the encoder. This CL gives VideoSendStreamImpl access to that
information via VideoSendStreamImpl::rtp_video_sender_.
TBR=sprang@webrtc.org
Bug: webrtc:10501
Change-Id: If207f0b6d2fb344da35b525cc104e8ba5cc614ec
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131323
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27489}
This CL wires up the new SetRates() method of the video encoders, and
refactors a few things in the process:
Most notably, the VideoStreamEncoderInterface is update so that the
|target_headroom| parameter is replaced with |link_allocation|, meaning
that instead of indicating bitrate capacity in excess of the target
bitrate, it indicates to total network capacity allocated for the
stream including the target bitrate. This matches the VideoEncoder API.
The VideoEncoder::RateControlParameters struct gets a few new helper
methods.
In VideoStreamEncoder, instead of adding more fields to the
|last_observed_bitrate*| family, uses an optional struct that
inherits from VideoEncoder::RateControlParameters.
Bug: webrtc:10481
Change-Id: Iee3965531142ae9b964ed86c0d51db59b1cdd61c
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131123
Commit-Queue: Erik Språng <sprang@webrtc.org>
Reviewed-by: Niels Moller <nisse@webrtc.org>
Reviewed-by: Åsa Persson <asapersson@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27487}
Any new capture implementation for windows should use VideoSourceInterface,
like current capturers for android, mac and ios.
Bug: None
Change-Id: I0dffa9fde5ba069aab6273bfef826d17f03877d2
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131337
Commit-Queue: Niels Moller <nisse@webrtc.org>
Commit-Queue: Tommi <tommi@webrtc.org>
Reviewed-by: Tommi <tommi@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27483}
rtcp_receiver_fuzzer was running over inputs of unreasonable
length, leading to timeouts. RTCP typically runs over UDP.
This CL limits the inputs to a bit over the max UDP payload length.
Bug: chromium:948469
Change-Id: I669a5b24c265bb3b6da2503da109efed32c25182
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131393
Reviewed-by: Danil Chapovalov <danilchap@webrtc.org>
Reviewed-by: Alex Loiko <aleloi@webrtc.org>
Commit-Queue: Elad Alon <eladalon@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27482}
A reasonable amount of incoming packets could generate feedback
for millions of packets.
Bug: chromium:949020
Change-Id: I7f3e6b75b683af5b2732c472cc92c6788540486b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131333
Commit-Queue: Johannes Kron <kron@webrtc.org>
Reviewed-by: Sebastian Jansson <srte@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27481}
The DefaultAudioQualityAnalyzer will read stats reports (temporarily
using the old PeerConnectionInterface::GetStats) and for each audio
stream it will collect some NetEq related stats.
When DefaultAudioQualityAnalyzer::Stop is invoked by the framework,
it will report the following metrics:
- expand_rate
- accelerate_rate
- preemptive_rate
- speech_expand_rate
- preferred_buffer_size_ms
Bug: webrtc:10138
Change-Id: Ie493456fcb9ed86455b12dabdab98a317387ef46
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/125980
Reviewed-by: Karl Wiberg <kwiberg@webrtc.org>
Reviewed-by: Henrik Boström <hbos@webrtc.org>
Reviewed-by: Artem Titov <titovartem@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27474}
This change adds FrameDecryptorInterface::Result to the FrameDecryptorInterface
API. Result contains a Status and bytes_written. This removes requiring out
parameters from the API and provides a simpler status return code for the
function. This is in response to comments suggested here:
https://webrtc-review.googlesource.com/c/src/+/131358
int FrameDecryptorInterface::Decrypt() will be removed in a follow up CL.
Bug: webrtc:10512
Change-Id: I47f19f154d1d8430acd6e4a6f433ab24c455fd51
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/131362
Commit-Queue: Benjamin Wright <benwright@webrtc.org>
Reviewed-by: Steve Anton <steveanton@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27470}
