This CL moves the high-pass filter to run in the full-band domain
instead of the split-band domain.
Bug: webrtc:11193
Change-Id: Ie61f4a80afda11236ecbb1ad544bbd0350c7bbfd
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161453
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#30112}
This CL adds code for doing signal-dependent downmixing
before the delay estimation in the multichannel case.
As part of the CL, the unittests of the render delay
controller are corrected. However, as that caused some of
them to fail, the CL (for now) as well disables the failing
test.
Bug: webrtc:11153,chromium:1029740, webrtc:11161
Change-Id: I0b765c28fa5e547aabd6dfbd24b626ff9a16346f
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161045
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29980}
This adds functionality to AEC3 to produce setup-specific
default configurations that are tailored to work well for the
number of channels at hand.
The tunings are only used for the case when no echo control factory
has been provided.
Bug: webrtc:11151,chromium:1029717
Change-Id: I1bd2d10327300c7b0f3169a52bf66700b781fd6b
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161086
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29972}
This CL changes the downmixing of the input to the delay estimation
for surround/stereo signals to be off by default.
A kill-switch is also added for enforcing the downmix to be on.
Bug: webrtc:10913
Change-Id: I1030fef593ba56416deeb13b80d2f3812bffb9ed
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/161012
Commit-Queue: Per Åhgren <peah@webrtc.org>
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29951}
This CL enables extracting the linear AEC output,
allowing for more straightforward
testing/development.
Bug: b/140823178
Change-Id: I14f7934008d87066b35500466cb6e6d96f811688
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/153672
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29789}
This CL adds support for multiple channels in the reverb
modelling. As a side effect, it also partly adds multi-channel
supports for the sections of the code.
Beyond adding the multi-channel support, a bug is fixed as part of
this CL. Since the bug fix affects the bitexactness, as a safety
precaution the CL includes the ability to override the bugfix.
Apart from the contributions from the bugfix, the changes have
been verified to be bitexact for a large set of mono recordings.
Bug: webrtc:10913
Change-Id: I1f307b532be85ef4182f8db41384f44d40a25219
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/156382
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29456}
This change keeps the original 48 kHz signal and uses it for the
fullband processing given that the following requirements are
fulfilled:
- Input signal is 48 kHz
- Output signal is 48 kHz
- Multiband processing is performed at 32 kHz
- The multiband processing does not modify the original signal
This avoids unnecessary, lossy resampling and band merging.
Bug: b/130016532
Change-Id: I690c26faba07eab0cbff6c0a95a81d89255dd1a1
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/155966
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29425}
Currently, APM fakes multichannel in two ways:
- With injected AECs, capture processing is only performed on the left
channel. The result is copied into the other channels.
- With multichannel render audio, all channels are mixed into one
before analysing.
This CL adds a flag to disable these behaviors, ensuring proper
multichannel processing happens throughout the APM pipeline.
Adds killswitches to separately disable render / capture multichannel.
Additionally - AEC3 currently crashes when running with multichannel.
This CL adds the missing pieces to at least have it run without
triggering any DCHECKS, including making the high pass filter properly
handle multichannel.
Bug: webrtc:10913, webrtc:10907
Change-Id: I38795bf8f312b959fcc816a056fba2c68d4e424d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/152483
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29248}
This is a reland of a66395e72f9fc86873bf443579ec73c3d78af240
Original change's description:
> Reland "Add core multi-channel pipeline in AEC3 This CL adds basic the basic pipeline to support multi-channel processing in AEC3."
>
> This is a reland of f3a197e55323aee974a932c52dd19fa88e5d4e38
>
> Original change's description:
> > Add core multi-channel pipeline in AEC3
> > This CL adds basic the basic pipeline to support multi-channel
> > processing in AEC3.
> >
> > Apart from that, it removes the 8 kHz processing support in several
> > places of the AEC3 code.
> >
> > Bug: webrtc:10913
> > Change-Id: If5b75fa325ed0071deea94a7546cb4a7adf22137
> > Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150332
> > Commit-Queue: Per Åhgren <peah@webrtc.org>
> > Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> > Cr-Commit-Position: refs/heads/master@{#29017}
>
> Bug: webrtc:10913
> Change-Id: Ifc4b13bd994cfd22dca8f8755fa5700617cc379d
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151124
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29034}
Bug: webrtc:10913
Change-Id: Id8da5666df8c86f290c73ad5dc9958199f1a7ebe
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151127
Commit-Queue: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29042}
This is a reland of f3a197e55323aee974a932c52dd19fa88e5d4e38
Original change's description:
> Add core multi-channel pipeline in AEC3
> This CL adds basic the basic pipeline to support multi-channel
> processing in AEC3.
>
> Apart from that, it removes the 8 kHz processing support in several
> places of the AEC3 code.
>
> Bug: webrtc:10913
> Change-Id: If5b75fa325ed0071deea94a7546cb4a7adf22137
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150332
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29017}
Bug: webrtc:10913
Change-Id: Ifc4b13bd994cfd22dca8f8755fa5700617cc379d
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/151124
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29034}
This reverts commit f3a197e55323aee974a932c52dd19fa88e5d4e38.
Reason for revert: Speculative revert, as this may'be broken some build bots
Original change's description:
> Add core multi-channel pipeline in AEC3
> This CL adds basic the basic pipeline to support multi-channel
> processing in AEC3.
>
> Apart from that, it removes the 8 kHz processing support in several
> places of the AEC3 code.
>
> Bug: webrtc:10913
> Change-Id: If5b75fa325ed0071deea94a7546cb4a7adf22137
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150332
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Sam Zackrisson <saza@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#29017}
TBR=saza@webrtc.org,peah@webrtc.org
Change-Id: I877d2993b9ccf024bd1d57bca1513c3e24d0bed3
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10913
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150940
Reviewed-by: Ilya Nikolaevskiy <ilnik@webrtc.org>
Commit-Queue: Ilya Nikolaevskiy <ilnik@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29022}
This CL adds basic the basic pipeline to support multi-channel
processing in AEC3.
Apart from that, it removes the 8 kHz processing support in several
places of the AEC3 code.
Bug: webrtc:10913
Change-Id: If5b75fa325ed0071deea94a7546cb4a7adf22137
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150332
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#29017}
This CL removes and replaces the legacy fixed-point high-pass filter in
APM with the floating point high-pass filter in AEC3.
Bug: webrtc:10907
Change-Id: I88cf8f622ab139e4ffa97f89a72425aa3becfc58
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150103
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28950}
This is a reland of 81c0cf287c8514cb1cd6f3baca484d668c6eb128
Original change's description:
> Simplification and refactoring of the AudioBuffer code
>
> This CL performs a major refactoring and simplification
> of the AudioBuffer code that.
> -Removes 7 of the 9 internal buffers of the AudioBuffer.
> -Avoids the implicit copying required to keep the
> internal buffers in sync.
> -Removes all code relating to handling of fixed-point
> sample data in the AudioBuffer.
> -Changes the naming of the class methods to reflect
> that only floating point is handled.
> -Corrects some bugs in the code.
> -Extends the handling of internal downmixing to be
> more generic.
>
> Bug: webrtc:10882
> Change-Id: I12c8af156fbe366b154744a0a1b3d926bf7be572
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149828
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28928}
Bug: webrtc:10882
Change-Id: I2ddf327e80a03468c41662ae63c619ff34f2363a
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150101
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28938}
This reverts commit 81c0cf287c8514cb1cd6f3baca484d668c6eb128.
Reason for revert: internal test failures
Original change's description:
> Simplification and refactoring of the AudioBuffer code
>
> This CL performs a major refactoring and simplification
> of the AudioBuffer code that.
> -Removes 7 of the 9 internal buffers of the AudioBuffer.
> -Avoids the implicit copying required to keep the
> internal buffers in sync.
> -Removes all code relating to handling of fixed-point
> sample data in the AudioBuffer.
> -Changes the naming of the class methods to reflect
> that only floating point is handled.
> -Corrects some bugs in the code.
> -Extends the handling of internal downmixing to be
> more generic.
>
> Bug: webrtc:10882
> Change-Id: I12c8af156fbe366b154744a0a1b3d926bf7be572
> Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149828
> Commit-Queue: Per Åhgren <peah@webrtc.org>
> Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#28928}
TBR=gustaf@webrtc.org,peah@webrtc.org
Change-Id: I2729e3ad24b3a9b40b368b84cb565c859e79b51e
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10882
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/150084
Reviewed-by: Steve Anton <steveanton@webrtc.org>
Commit-Queue: Steve Anton <steveanton@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28931}
This CL performs a major refactoring and simplification
of the AudioBuffer code that.
-Removes 7 of the 9 internal buffers of the AudioBuffer.
-Avoids the implicit copying required to keep the
internal buffers in sync.
-Removes all code relating to handling of fixed-point
sample data in the AudioBuffer.
-Changes the naming of the class methods to reflect
that only floating point is handled.
-Corrects some bugs in the code.
-Extends the handling of internal downmixing to be
more generic.
Bug: webrtc:10882
Change-Id: I12c8af156fbe366b154744a0a1b3d926bf7be572
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/149828
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#28928}
This change reduces the risk of echo due to noise in the headroom
of the linear filter.
Changes:
- Use shorter delay headroom
- Delay headroom is specified in samples (not blocks)
- No hysteresis limit when delay is reduced
Bug: chromium:119942,webrtc:10341
Change-Id: I708e80e26d541dff8ca04b6da2d346a1d59cbfcb
Reviewed-on: https://webrtc-review.googlesource.com/c/src/+/126420
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#27126}
This CL removes the legacy, no longer used, render buffering code. It
also removes four unused parameters from the AEC3 config. The change
is tested for bit-exactness.
Bug: webrtc:8671
Change-Id: I2bb6cb7a1097863f228767d757d551c00593bb00
Reviewed-on: https://webrtc-review.googlesource.com/c/119701
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26399}
This reverts commit 74ba99062c48b278675cfe52643719202296fddc.
Reason for revert: Breaks downstream project.
Original change's description:
> AEC3: Lockless transfer of render data to the capture thread
>
> This CL implements a lockless queue that replaces SwapQueue
> in the RenderWriter. This avoid stalls when the render and
> capture threads are accessing the queue at the same time.
>
> Bug: webrtc:10205
> Change-Id: Ie7d6fcf9c80fad957e2a90537658fb730ca2ed72
> Reviewed-on: https://webrtc-review.googlesource.com/c/117643
> Reviewed-by: Per Åhgren <peah@webrtc.org>
> Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
> Cr-Commit-Position: refs/heads/master@{#26298}
TBR=gustaf@webrtc.org,peah@webrtc.org
Change-Id: Ie76ee8835da4e44982d181a152c9ffa19ff33e23
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: webrtc:10205
Reviewed-on: https://webrtc-review.googlesource.com/c/118142
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Commit-Queue: Mirko Bonadei <mbonadei@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26304}
This CL implements a lockless queue that replaces SwapQueue
in the RenderWriter. This avoid stalls when the render and
capture threads are accessing the queue at the same time.
Bug: webrtc:10205
Change-Id: Ie7d6fcf9c80fad957e2a90537658fb730ca2ed72
Reviewed-on: https://webrtc-review.googlesource.com/c/117643
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#26298}
Fixes the ENR threshold used in the dominant nearend detection when
the kill-switch WebRTC-Aec3UseLegacyNormalSuppressorTuning is pulled.
Bug: webrtc:8671,chromium:911141
Change-Id: I30ee58009633b3a9e12eff692226baada624a049
Reviewed-on: https://webrtc-review.googlesource.com/c/112903
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25880}
This CL utilizes the existing, but unused, ability to set
different histogram thresholds for early and late delay
estimation. It does so by tuning the parameters for these.
On top of that, some corrections are added to correctly
handle resets and the use of the hysteresis thresholds.
Bug: webrtc:19886,chromium:896334
Change-Id: I950ac107c124541af8f02b4403f477dda71cc1a1
Reviewed-on: https://webrtc-review.googlesource.com/c/106706
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25443}
This CL is the result of running include-what-you-use tool on part
of the code base (audio target and dependencies) plus manual fixes.
bug: webrtc:8311
Change-Id: I277d281ce943c3ecc1bd45fd8d83055931743604
Reviewed-on: https://webrtc-review.googlesource.com/c/106280
Commit-Queue: Yves Gerey <yvesg@google.com>
Reviewed-by: Mirko Bonadei <mbonadei@webrtc.org>
Reviewed-by: Patrik Höglund <phoglund@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25311}
This CL simplifies the buffering of render data. Instead of making assumptions
about the worst possible platform, it leverages recent improvements in
the delay estimator to quickly adapt when the conditions change.
Pros:
- No capture delay, delay is found ~200 ms faster.
- Cleaner code that makes the concept of delay more clear.
- Allows for removal of one matched filter because of the jitter headroom
removal.
Cons:
- Delay estimator needs to re-adapt when the call jitter increases.
The code can be deactivated by a kill switch. When the kill switch is
pulled the CL is bit exact.
Bug: webrtc:9726,chromium:895338
Change-Id: Ie2f9c8c5ce5b5a4510b4bdb95db2b970b57cd5d0
Reviewed-on: https://webrtc-review.googlesource.com/c/96920
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25169}
In this CL the use of the stationarity properties at init is set to true by default.
Bug: webrtc:9865, chromium:894439
Change-Id: I716ce0d792a50616dc38cc0ba6f2c702549a81cc
Reviewed-on: https://webrtc-review.googlesource.com/c/105303
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25123}
"Perfection is achieved, not when there is nothing more to add,
but when there is nothing left to take away."
This CL removes the following kill-switches from AEC3
- WebRTC-Aec3DownSamplingFactor8KillSwitch
- WebRTC-Aec3NewSuppressionKillSwitch
- WebRTC-Aec3ShadowFilterJumpstartKillSwitch
- WebRTC-Aec3SlowFilterAdaptationKillSwitch
- WebRTC-Aec3SuppressorNearendAveragingKillSwitch
It also removes code paths and configuration parameters that are no
longer in use. The list of kill-switches in the audio processing
fuzzer test is updated.
The change has been tested for bit-exactness.
Bug: webrtc:8671
Change-Id: Ie0af86a14baf853548bf9c00b2b9b3bbc32c1aaa
Reviewed-on: https://webrtc-review.googlesource.com/c/105324
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25120}
This CL removes outdated code for testing of platforms with clock-drift
Bug: webrtc:8671
Change-Id: Ie202c514609d9f3d2357107b0daf895331275797
Reviewed-on: https://webrtc-review.googlesource.com/c/105183
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25105}
This CL ensures that the default setting for the usage of stationary signal
properties is not overridden by mistake.
Bug: chromium:894243
Change-Id: I85ab65383ee82b5f3153864da7a0cede7776c146
Reviewed-on: https://webrtc-review.googlesource.com/c/105181
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25104}
This CL changes the tuning of the echo suppressor for the case when
there is echo only. The resulting effect is a slight increase of
transparency
Bug: webrtc:9844,chromium:893744
Change-Id: I5e6a867e0d03dc3a468a8f5cfa64103e001baae1
Reviewed-on: https://webrtc-review.googlesource.com/c/104760
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25075}
This CL utilizes the AEC3 ability to tailor the suppressor during
situations when the nearend dominates over the residual echo. This is
done by increasing the thresholds for transparent echo suppressor
behavior when the nearend is strong compared to the residual echo.
Bug: webrtc:9836, chromium:893744
Change-Id: Ic06569eefc7f2557b401db43b3ac84b299071294
Reviewed-on: https://webrtc-review.googlesource.com/c/104460
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25071}
This is a new attempt to reduce the filter divergence
during double-talk without regressing in clock-drift
scenarios.
- The error_floor in decreased to allow for slow adaptation
when the filter performs well.
- The leakage_diverged is increased to allow for fast adaptation
when the shadow filter performs better.
- A new parameter, error_ceil, was added to stop the filter from
adapting too fast.
Bug: webrtc:9746,chromium:883264
Change-Id: Ie2868d2388b48412a192a004ec13f9eff34517b8
Reviewed-on: https://webrtc-review.googlesource.com/c/100460
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Reviewed-by: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25063}
This CL lowers the default reverb decay to better match the standard
rooms where calls are made.
Bug: webrtc:9843
Change-Id: I46f1a629ecfdd72561829326d4fa58ede8107b6c
Reviewed-on: https://webrtc-review.googlesource.com/c/104740
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#25061}
This CL adds functionality for applying an optional fixed delay in AEC3
to the capture signal
Bug: webrtc:9647
Change-Id: Id3b3f896bcf203e6611298dc804c3c80da9f1883
Reviewed-on: https://webrtc-review.googlesource.com/95142
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24399}
This CL lowers the margins in the AEC3 conservative mode to increase
the transparency when there are audio buffer issues, and during call
startup.
In particular, this CL adjusts the parameters and thresholds to
-Make the requirements for filter divergence more strict, to minimize
the transparency loss during minor filter divergence.
-Decrease the echo power uncertainty used during initial filter
convergence, to increase transparency after audio buffer issues.
-Deactivate the enforcement of conservative suppressor gain after
audio buffer.
Bug: webrtc:9641,chromium:875611
Change-Id: Ie171bb411f17a1e8661c291118debd334f65c74f
Reviewed-on: https://webrtc-review.googlesource.com/94776
Commit-Queue: Per Åhgren <peah@webrtc.org>
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Reviewed-by: Henrik Lundin <henrik.lundin@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24333}
This CL adds a functionality that jump-starts the
AEC3 shadow filter whenever it performs consistently
worse than the main filter.
The jump-start is done such that the shadow filter
is re-initialized using the main filter coefficients.
The effects of this is a significantly more accurate
main linear filter which leads to less echo leakage
and better transparency
Bug: webrtc:9565, chromium:867873
Change-Id: Ie0b23cd536adc7ce96fc3ed2a7db112aec7437f1
Reviewed-on: https://webrtc-review.googlesource.com/90413
Reviewed-by: Sam Zackrisson <saza@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#24117}
The main filter is adapted at a lower rate which reduces the risk of
diverging during double talk. The change yields notable transparency
improvements.
Bug: webrtc:9497
Change-Id: Ib23b7a4055d313dede535d2b65dc7e023a2db042
Reviewed-on: https://webrtc-review.googlesource.com/87300
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23858}
Reduce noise of the nearend spectrum estimation by averaging multiple
frames.
Bug: webrtc:9420,chromium:853699
Change-Id: Iad7e68b1209a369e263b2d892791943e42bfbb3f
Reviewed-on: https://webrtc-review.googlesource.com/83960
Reviewed-by: Jesus de Vicente Pena <devicentepena@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23655}
In this work we introduce some changes on how the reverberation model for AEC3 is applied. Currently, the exponential modelling of the tails is applied over the linear echo estimates. That might result in an overestimation of the reverberation tails under certain conditions. In this work, the reverberation model is instead applied over an estimate of the energies at the tails of the linear estimate.
Additionally, the stationary estimator is changed so it does not disable the aec immediately after a burst of activity.
Bug: webrtc:9384,webrtc:9400,chromium:852257
Change-Id: Ia486694ed326cfe231fc688877c0b9b6e2c450ff
Reviewed-on: https://webrtc-review.googlesource.com/82161
Reviewed-by: Per Åhgren <peah@webrtc.org>
Commit-Queue: Jesus de Vicente Pena <devicentepena@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#23599}
This CL adds support for using any externally reported audio buffer
delay to set the initial alignment in AEC3 which is used before the
AEC has been able to detect the delay.
Bug: chromium:834182,webrtc:9163
Change-Id: Ic71355f69b7c4d5815b78e49987043441e7908fb
Reviewed-on: https://webrtc-review.googlesource.com/70580
Reviewed-by: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Gustaf Ullberg <gustaf@webrtc.org>
Commit-Queue: Per Åhgren <peah@webrtc.org>
Cr-Commit-Position: refs/heads/master@{#22917}
